How to clean the colloid mill equipment after use?
May 20, 2025| Colloid mill is mainly used to grind liquid materials to make them fine, so the properties of residual materials and the structural characteristics of the equipment need to be considered during cleaning. For example, daily cleaning, deep cleaning, special case handling, and maintenance. Different cleaning methods need to be considered, such as no-load cleaning, disassembly cleaning, whether detergents are needed, and cleaning precautions for parts of different materials (such as stainless steel, seals). Also pay attention to safety, such as power off, careful operation during disassembly to avoid damage to parts.
| Model | Voltage | Power KW | Output KG/h | Weight KG | Dimensions (mm) |
| Gn-50 | 380/50HZ | 220V/1.5 | 10-30 | 65 | 610*400*700 |
| GN-80 | 380/50HZ | 4 | 50-100 | 210 | 850*450*930 |
| GN-110 | 380/50HZ | 7.5 | 100-200 | 300 | 850*450*1000 |
| GN-130 | 380/50HZ | 11 | 200-300 | 350 | 1000*500*1200 |
| GN-180 | 380/50HZ | 18.5 | 500-800 | 420 | 1050*550*1250 |
| GN-220 | 380/50HZ | 30 | 600-900 | 480 | 1080*600*1300 |
| GN-240 | 380/50HZ | 37/45 | 1000-1500 | 1300 | 1400*600*1350 |
| GN-300 | 380/50HZ | 75/90 | 3000-5000 | 1600 | 1500*700*1450 |
The specific cleaning operation of the colloid mill needs to include the following parts:
1. Preparation: power off, disassemble removable parts, and check for contamination.
2. Daily cleaning steps: no-load flushing, use clean water or detergent, and brush parts.
3. Deep cleaning: For stubborn residues, use special detergents and disassemble grinding parts if necessary.
4. Special case handling: such as grinding grease and corrosive materials.
5. Maintenance after cleaning: drying, lubrication, assembly inspection.
6. Precautions: material compatibility, avoid damage to seals, safe operation.