Do you know the operation process of colloid mill?
May 20, 2025| Pre-start inspection:
Before starting the colloid grinding pump, the equipment should be fully inspected to ensure that all parts are intact, the fasteners are not loose, and there are no foreign objects in the grinding chamber. This helps to avoid equipment failure and material contamination, and ensure the smooth progress of the refinement and dispersion process.
Material pretreatment:
Pretreatment of new materials, such as crushing and screening, helps to reduce energy consumption and equipment wear during the grinding process and improve the refinement and dispersion efficiency.
Observe the operating status:
During the grinding process, the material situation at the discharge port should be closely observed to determine whether the refinement and dispersion effect meets expectations. If the expected effect is not achieved, it is necessary to adjust the working parameters in time, such as the grinding disc gap, speed and flow rate.
| Model | Voltage | Power KW | Output KG/h | Weight KG | Dimensions (mm) |
| Gn-50 | 380/50HZ | 220V/1.5 | 10-30 | 65 | 610*400*700 |
| GN-80 | 380/50HZ | 4 | 50-100 | 210 | 850*450*930 |
| GN-110 | 380/50HZ | 7.5 | 100-200 | 300 | 850*450*1000 |
| GN-130 | 380/50HZ | 11 | 200-300 | 350 | 1000*500*1200 |
| GN-180 | 380/50HZ | 18.5 | 500-800 | 420 | 1050*550*1250 |
| GN-220 | 380/50HZ | 30 | 600-900 | 480 | 1080*600*1300 |
| GN-240 | 380/50HZ | 37/45 | 1000-1500 | 1300 | 1400*600*1350 |
| GN-300 | 380/50HZ | 75/90 | 3000-5000 | 1600 | 1500*700*1450 |
Cleaning and maintenance:
After the grinding is completed, the internal residue of the colloid grinding pump should be rinsed with clean water in time to prevent drying and curing from affecting the next use. Regular maintenance and maintenance of the equipment, such as replacing wear parts and checking fasteners, will help extend the service life of the equipment and maintain the refinement and dispersion effect.
Cooling water management:
During the grinding process, appropriate cooling water temperature and pressure can help reduce the grinding disc temperature, improve grinding efficiency and protect the equipment. Therefore, when adjusting the grinding fineness, attention should also be paid to optimizing parameters such as cooling water temperature and pressure.
Material property considerations:
The physical and chemical properties of different new materials vary greatly, so the material properties must be fully considered during the refinement and dispersion process. For example, for materials with high viscosity, specially designed grinding discs and speed control strategies may be required.