How long is the maintenance period of the mutton cutting and rolling machine?
May 30, 2025| The use of the mutton roll machine requires regular maintenance.
Weekly maintenance: Clean the surface of the machine once a week, including the machine casing, blades, conveyor belts and other parts. At the same time, check whether the blades are sharp. If the blades need to be replaced, they should be replaced immediately.
Monthly maintenance: Check the inside of the machine once a month, including whether the motor, transmission belt, conveyor belt and other parts are normal. At the same time, check whether the lubricating oil needs to be replenished, and if necessary, it should be replenished.
| Model | Power | Size (length*height*width) |
| single roll | 750W | 660*720*380(cm) |
| CNC single roll | 1500W | 1100*930*400(cm) |
| Double roll | 2500W | 1400*1300*450(cm) |
| Double roll reinforced model | 3000W | 1450*1400*550(cm) |
| Four roll | 3000W | 1500*1400*700(cm) |
| Six roll | 3000W (380V) | 1600*1400*850(cm) |
| Eight roll | 5500W (380V) | 1700*1450*1150(cm) |
Annual maintenance: Perform a comprehensive overhaul of the machine once a year, including replacing worn parts, checking whether the wires and plugs are damaged, etc. At the same time, perform a comprehensive cleaning and disinfection of the machine.
The above is the general maintenance cycle of the mutton roll cutter. The specific maintenance cycle can be adjusted according to the frequency of use and maintenance items. During use, if any abnormal situation is found, it should be handled in time to ensure the normal operation of the machine and extend its service life.