Reasons and solutions for the failure of the extruder to discharge
Feb 28, 2025| Reasons and solutions for the failure of the extruder to discharge due to equipment failure
1. Extruder motor failure: At this time, you can check whether the motor is running normally or whether the motor suspension is loose. If there is a problem, replace the motor or tighten the screws in time.
2. The extruder belt is loose or broken: At this time, you need to open the extruder cover and check the belt status. If it is loose or broken, it needs to be replaced in time.
3. Extruder transmission gear wear: If the gear is severely worn, the machine will not be able to discharge normally. In this case, the transmission gear needs to be replaced.
| Model | Power | Capacity | Heater | Dimension(mm) | Weight |
| LYS-65 | 5.5kw | 50 kg/h | 1 kw | 1720*870*1050 | 350 kg |
| LYS-70 | 15kw | 150kg/h | 1 kw | 1720*970*1250 | 500 kg |
| LYS-85 | 18.5kw | 200-300kg/h | 2 kw | 1360*1870*850 | 650 kg |
| LYS-95 | 22kw | 400-500kg/h | 2 kw | 2300*1170*1400 | 850 kg |
Reasons and solutions for the failure of the extruder to discharge due to improper operation
1. The operator did not install the parts correctly: In this case, the operator needs to check whether the installation is stable. If reinstallation is required, follow the correct installation method.
2. The operator did not start the operation according to the normal process: Before starting the operation, it is necessary to check the machine to confirm that there is no fault in the machine and operate it according to the normal operation process of the extruder.
3. The operator does not maintain the machine properly: The extruder needs regular maintenance, such as cleaning the filter, lubricating the transmission parts, etc. If the maintenance is not in place, the machine will malfunction, which will lead to no material discharging. Therefore, the operator needs to strictly follow the requirements of the machine manual for maintenance.