How To Clean The Colloid Mill After Use?
Jun 27, 2025| Products Description
Colloid mills are mainly used to grind liquid materials to make them fine, so the properties of the residual materials and the structural characteristics of the equipment need to be considered during cleaning. For example, daily cleaning, deep cleaning, special case handling, and maintenance. Different cleaning methods need to be considered, such as no-load cleaning, disassembly cleaning, whether detergents are needed, and cleaning precautions for parts of different materials (such as stainless steel and seals). Safety should also be paid attention to, such as power off and careful operation during disassembly to avoid damage to parts.
| Model | Voltage | Power KW | Output KG/h | Weight KG | Dimensions (mm) |
| Gn-50 | 380/50HZ | 220V/1.5 | 10-30 | 65 | 610*400*700 |
| GN-80 | 380/50HZ | 4 | 50-100 | 210 | 850*450*930 |
| GN-110 | 380/50HZ | 7.5 | 100-200 | 300 | 850*450*1000 |
| GN-130 | 380/50HZ | 11 | 200-300 | 350 | 1000*500*1200 |
| GN-180 | 380/50HZ | 18.5 | 500-800 | 420 | 1050*550*1250 |
| GN-220 | 380/50HZ | 30 | 600-900 | 480 | 1080*600*1300 |
| GN-240 | 380/50HZ | 37/45 | 1000-1500 | 1300 | 1400*600*1350 |
| GN-300 | 380/50HZ | 75/90 | 3000-5000 | 1600 | 1500*700*1450 |
The specific cleaning operation of the colloid mill needs to include the following parts:
Preparation: power off, disassemble removable parts, check for contamination.
Daily cleaning steps: rinse with no-load operation, use clean water or detergent, and brush parts.
Deep cleaning: for stubborn residues, use special detergents and disassemble grinding parts if necessary.
Handling of special situations: such as handling after grinding grease and corrosive materials.
Maintenance after cleaning: drying, lubrication, assembly inspection.
Precautions: material compatibility, avoid damage to seals, and safe operation.
If you have any questions about our equipment, please feel free to contact us.