What Are The Functions Of Stainless Steel Colloid Mill?

The grinding of stainless steel colloid mill relies on the relative movement of two tooth surfaces, one of which rotates at high speed and the other is stationary, so that the material passing through the tooth surface is subjected to great shear force and friction. At the same time, under the action of high-frequency vibration, high-speed vortex and other complex forces, the material is effectively dispersed, floated, crushed and homogenized.

 

1. Food industry: ice cream, moon cake fillings, dairy products, chocolate, bean paste, jam, peanut butter, cream drinks, etc.
2. Chemical industry: pigments, lubricating oils, spices, dyes, emulsified asphalt, emulsified rubber, catalysts, paints and coatings, etc.
3. Pharmaceutical industry: various types of syrups, nutrient solutions, pastes, biological products, cod liver oil, royal jelly, vaccines, various ointments, various oral liquids, etc.
4. Daily chemicals: shoe polish, toothpaste, cosmetics, balm, soap, detergent, etc.
5. Other industries: construction industry, paper industry, plastic industry, battery industry, etc.

 

 

Model	Voltage	Power KW	Output KG/h	Weight KG	Dimensions (mm)
Gn-50	380/50HZ	220V/1.5	10-30	65	610*400*700
GN-80	380/50HZ	4	50-100	210	850*450*930
GN-110	380/50HZ	7.5	100-200	300	850*450*1000
GN-130	380/50HZ	11	200-300	350	1000*500*1200
GN-180	380/50HZ	18.5	500-800	420	1050*550*1250
GN-220	380/50HZ	30	600-900	480	1080*600*1300
GN-240	380/50HZ	37/45	1000-1500	1300	1400*600*1350
GN-300	380/50HZ	75/90	3000-5000	1600	1500*700*1450

 

1. Connect the feed hopper or feed pipe, and the discharge port, or the discharge circulation pipe. Connect the cooling water pipe and the drain pipe.
2. Install the electric starter, and equip it with an ammeter and an indicator light. After connecting the power supply, the machine should be turned on to determine the direction of the motor. The direction should be clockwise when viewed from the feed port.
3. Adjust the gap of the grinding disc, loosen the two handles (turn counterclockwise) and then turn the adjustment ring clockwise. Use one hand to reach into the square mouth of the base to turn the motor fan blade. When you feel a little friction when turning the adjustment ring, stop immediately. Reverse the adjustment ring slightly to make the gap of the grinding disc larger than the alignment number. Generally, under the condition of meeting the fineness requirements of the processed material, the gap of the grinding disc should be as large as possible. This can extend the service life of the grinding disc. Then tighten the handle clockwise to lock the adjustment ring and fix the gap between the grinding discs.

 

1. Internal tooth structure, small size, low energy consumption; the colloid mill motor is only 55KW.
2. Imported stator and rotor core components, unique anti-corrosion and anti-wear materials, guaranteed life of more than 200,000 tons.
3. The colloid mill motor is controlled by a frequency converter, with small current impact and the speed can be adjusted according to requirements.
4. The gap of the colloid mill can be adjusted within the range of 0.1 to 5 mm.