video

Frozen Meat Slicer

The meat slicer can slice a variety of meats.

  • Product Introduction

Commercial meat slicer analysis
Slicers are often used in commercial kitchens to process meat ingredients and can cut ingredients quickly. Due to the high frequency of use, slicers are prone to malfunction, so it is necessary to master the corresponding use and maintenance skills.
1. If the meat is frozen too hard, it is easy to break when cutting thin slices. When cutting thick slices, the resistance is too large, which can easily cause the motor to stall or even burn the motor. Therefore, the meat must be slowed down before cutting (the process of placing the frozen meat in an inMexicotor so that the internal and external temperatures rise slowly at the same time is called slowing down).
2. When the thickness of the sliced ​​meat is less than 1.5mm, the appropriate internal and external temperature of the meat is -4℃ (put the frozen meat in the freezer and turn off the power for 8 hours). At this time, press the meat with your fingernails, and an indentation will appear on the surface of the meat.
3. When the slice thickness is greater than 1.5mm, the temperature of the meat should be higher than -4℃. And as the slice thickness increases, the temperature of the meat should also increase accordingly.

 

Electric meat cutter

meat slicer for bacon

Model HF-50A HF-50B HF-100A
Power 0.75KW 1.5KW 2.5KW
Blade Width 16CM 16CM 25CM
Meat slice thickness 0.1-8mm 0.1-8mm 0.1-10mm
Conveyor length customized customized customized
Machine size 660*720*380mm 1100*930*400mm 1450*450*1350mm
Machine weight 50KG 100kg 120KG
Output 50KG/H 50KG/H 100KG/H

 

About electric meat slicer
1. The circular blade of the slicer is made of high-quality wear-resistant tool steel, and the blade is sharpened before leaving the factory.
2. If the circular blade becomes blunt after use, it can be re-sharpened with the knife sharpener provided with the machine. The blade should be sharpened frequently. Before sharpening, the oil stains on the blade should be cleaned to prevent the oil stains from contaminating the grinding wheel. If the grinding wheel is contaminated by oil stains, it can be cleaned with a brush and alkaline water.
3. When the knife sharpener is not sharpening, the grinding wheel is far away from the blade, and when sharpening, the grinding wheel is close to the blade. Pay attention to adjusting the height and angle of the grinding wheel in real time.
4. Press the "cut meat" button to rotate the blade, turn the knob at the end of the grinding wheel shaft clockwise to make the grinding wheel contact the blade, and let the rotating blade drive the grinding wheel to rotate to achieve sharpening.
5. Sharpening effect: Turn the grinding wheel shaft knob to separate the grinding wheel from the blade, then press the "cut meat" button to stop the blade and observe the sharpening effect. If sharp burrs appear on the blade edge, it proves that the blade edge is sharp and the sharpening operation can be stopped. Otherwise, repeat the above sharpening process until you are satisfied.

 

Restaurant slicer

beef slicer

 

Small meat slicer maintenance
1. The slicer slide should be refueled at least twice a day, 2-3 drops each time, using lubricating oil or sewing machine oil.
2. The gear box should be replaced with gear oil once a year after the first use for half a year.
IV. Daily inspection and maintenance
1. Check whether the transmission mechanical parts are firmly connected, whether the screws are loose, and whether the machine runs smoothly. If any problems are found, they should be solved in time.
2. After the blade is used for a period of time, the diameter will become smaller. When the blade is more than 5mm away from the fixed length plate, loosen the fastening screw on the back of the fixed length plate, move the fixed length plate toward the blade, and leave a gap of 2mm from the blade, and then tighten the screw.
Although the slicer is not as important as common kitchen equipment such as stoves and freezers, if a malfunction occurs, it will also affect the normal operation of the kitchen. In daily use, you must pay more attention.

 

Customer visit

Customer visit

Hot Tags: frozen meat slicer, China frozen meat slicer manufacturers, factory, durable meat roll slicer, Electric Cold Meat Slicer, Electric Slicer For Meat, electric slicer for meat rolls, meat roll slicing apparatus, cutter for reliable meat roll cutting in restaurant

← Previous: Slicer Beef
Send Inquiry

You Might Also Like

(0/10)

clearall