Butter Grinder Machine
Model
130 160 180
Capacity（t/h）
0.4-2 0.6-4 0.8-6
Outer Size
700 975 975
- Product Introduction
Product Introduction
In the previous article, we talked about the composition and maintenance of the colloid mill. Here we will briefly introduce one of the important components of the colloid mill, how to adjust the rotor (moving grinding disc) and the stator (static grinding disc), and the matters that need to be paid attention to when cleaning it.
First, we need to understand the composition of the rotor and stator of the colloid mill.
By turning the adjustment handle on the device, the adjustment ring between the rotor and the stator can be driven, and the adjustment ring drives the displacement between the stator and the rotor, so that the gap between the rotor and the stator is increased or decreased.
Product Parameters
| Model | 130 | 160 | 180 |
| Capacity(t/h) | 0.4-2 | 0.6-4 | 0.8-6 |
| Speed | 2930 | 2930 | 2930 |
| (m/min) | |||
| Outer Size | 700 | 975 | 975 |
| Weight (kg) | 280 | 350 | 380 |
This is how to adjust the gap between the rotor and stator of the colloid mill. It should be noted that when using the colloid mill, the gap between the rotor and the stator needs to be adjusted. The adjustment handle and adjustment ring are needed here, so it is necessary to adjust according to the actual material conditions. Remember not to allow too much friction between the adjustment ring and the stator and rotor.
Regarding the disassembly and cleaning of the colloid mill rotor, stator and adjustment device, it should be noted that the first and second levels of the rotor and stator assembly cannot be separated. Professional cleaning agents can be used for cleaning. After cleaning, they need to be fully dried or blown dry to ensure that there is no debris between the rotor and the stator to ensure that they are clean.
The above is the adjustment method and cleaning instructions for the gap between the colloid mill rotor and stator. The colloid mill factory reminds all colloid mill users that the gap between the rotor and the stator is not large. During the cleaning process, it needs to be carefully wiped or dried to avoid unnecessary impact on the inside of the colloid due to unclean cleaning.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: butter grinder machine, China butter grinder machine manufacturers, factory, peanut butter roaster, peanut butter reporting process, peanut butter retrofit system, peanut butter sales process, peanut butter reporting system, peanut butter financial management process
