A Puff Snack Extruder Machine
Model
LYS-65 LYS-70 LYS-85 LYS-95
Power
5.5kw 15kw 18.5kw 22kw
Capacity
50 kg/h 150kg/h 200-300kg/h 400-500kg/h
- Product Introduction
Product Introduction
A puff snack extruder machine is a device that transforms raw materials like cornmeal and rice into puffed snacks by forcing them through a heated, high-pressure chamber. The machine typically mixes the ingredients with water, then extrudes them through a die, creating the desired shape. The heat and pressure cause the water to steam, puffing up the snack.
Product Parameters
|
Model |
Power |
Capacity |
Heater |
Dimension(mm) |
Weight |
|
LYS-65 |
5.5kw |
50 kg/h |
1 kw |
1720*870*1050 |
350 kg |
|
LYS-70 |
15kw |
150kg/h |
1 kw |
1720*970*1250 |
500 kg |
|
LYS-85 |
18.5kw |
200-300kg/h |
2 kw |
1360*1870*850 |
650 kg |
|
LYS-95 |
22kw |
400-500kg/h |
2 kw |
2300*1170*1400 |
850 kg |

Factors affecting product quality
1. Gelatinization
The expansion and splitting of starch granules in water at an appropriate temperature to form a uniform paste solution is called gelatinization. Only when the starch is completely gelatinized but not disintegrated, its intermolecular hydrogen chain will break and fully absorb water, which is the basis for the highly crystalline starch granules to wrap water in the next aging process, thus laying the foundation for full puffing.
2. Aging
The puffed starch eventually becomes opaque starch through aging. During the cooking process, the water absorbed during the gelatinization process is wrapped in the microcrystalline structure of the starch. When fried at high temperature, the water in the starch microcrystalline particles quickly vaporizes and sprays out, causing the starch tissue to expand and form a porous and loose structure to achieve the purpose of puffing.
3. Drying
The moisture content in the product directly affects the degree of puffing of the product, so the control of moisture content is crucial. If the moisture content of the dried product is too high, it will be difficult to discharge the moisture in a short time during the frying and puffing process, resulting in the product not puffing, soft and not crispy, which will destroy the characteristics of the product. If the moisture content is too low, it will be difficult to form enough jet steam to expand the food tissue in a short time during the frying process, which will also reduce the puffing degree of the product. Therefore, the drying time should be around 7 hours, when the moisture content is most suitable.

FAQ
Q:Could you supply all the parameters about the machines?
A: Yes, we will supply all the parameters, price, layout drawing, factory design etc.
Q: What is your terms of payment ?
A: 30% T/T in advance , 70% balance before shipment after inspection.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors

Hot Tags: a puff snack extruder machine, China a puff snack extruder machine manufacturers, factory, food extruder for breakfast cereals, new food extruder, food extruder machine compatibility, food extruder for fried confectionery production, food extruder for food energy conservation, food extruder for food energy management












