video

Corn Puffed Food Extruder

Model
40 50 60
Power
5.5KW 7.5 kW 15kW
Weight
310KG 330KG 360KG

  • Product Introduction

 

Extruder for food

 
puff corn extruder machine

The grain puffing machine is a commonly used food processing machinery and equipment, which is widely used in making various puffed foods, such as puffed cereals, puffed rice, puffed beans, etc. Its basic principle is to use high temperature and high pressure to make the grains expand and deform, and change their structure and texture, thereby increasing the taste, nutrition, and flavor, and improving the quality and market competitiveness of food.

The warm-up time of the grain extruder refers to the heating time required before the machine is put into operation. This time varies with different models. Generally speaking, the warm-up time is about 10-20 minutes. The specific time depends on the size and power of the machine, power supply voltage and other specific conditions. It is also necessary to gradually increase the temperature during the heating process to avoid deformation and failure of the machine body due to excessive heating.

puff extruder
Model Capacity Power Weight Dimension
DF-40 40-50KG/H 5.5KW 310KG 1300*1200*1100MM
DF-50 80-100KG/H 7.5KW 330KG 1350*1100*1200MM
DF-60 120-150KG/H 15KW 360KG 1350*110*1200MM
DF-90 400-500KG/H 30KW 800KG 1650*1450*1300MM
Extruder in food industry
 

 

In addition to the warm-up time, the following points should be noted when using the grain puffing machine:
1. Add materials evenly, not too much or too little. Too much will cause the machine to be overloaded and easily damage the machine body; too little will affect the heating effect.
2. Control the temperature moderately, not too high or too low. Too high will cause the puffed food to burn, and too low will affect the puffing effect.
3. After processing, the machine should be cleaned in time to prevent residue accumulation from affecting the next processing.

small corn puff extruder machine
 

The temperature of the extruder is one of the key factors. Too high or too low will affect the extrusion effect. Therefore, the temperature needs to be adjusted appropriately according to the type of raw materials and the extrusion requirements during use. It is usually recommended to control the temperature at around 160°C and not exceed 200°C.
Pay attention to safety during the use of the extruder, and the operator should wear protective equipment to avoid accidents. At the same time, pay attention to cleanliness and hygiene during use to avoid the mixing of impurities and pollutants.
The effect of the extruder depends on the quality and type of raw materials. Therefore, it is necessary to select suitable raw materials during use, and try to use high-quality and fresh ingredients to ensure the taste and quality of the product.

soy extruder
Our Advantages

 

150

+

Number Of Employees

3000㎡+

Factory Area

10

+

Years Of Experience

800㎡+

Company Area

 

Extruder snack

 

 

During the use of the extruder, attention should be paid to the control of the amount of feed and water added. Too much feed can easily cause equipment blockage, and too little water will affect the extrusion effect and product quality. It is generally recommended to reasonably match and feed according to the equipment specifications and raw material types.
The extruder needs regular maintenance during use, including equipment cleaning, lubrication, tightening and replacement of wearing parts, etc., to ensure the stability and long-term service life of the equipment.
Poor raw materials: If the moisture content of the raw materials is too high or the quality is poor, it is easy to cause uneven extrusion or impurities. The amount of water added and the temperature of the raw materials can be appropriately adjusted, or high-quality raw materials can be replaced.

 

Qualification & Honor

 

Qualification & Honor

 

Customer visits

 

Customer visits

 

 

 

 

Hot Tags: corn puffed food extruder, China corn puffed food extruder manufacturers, factory, energy efficient food extruder, food extruder for candies, food extruder machine compatibility, food extruder for ready to eat snacks production, food extruder for ready to eat snacks, food extruder for extruded protein products

Send Inquiry

(0/10)

clearall