video

Snack Food Extruder Machine

Model
60 65 70
Power
56kw 57kw 82kw
Wproduction capacities
100-160kg/h 100-160kg/h 200-250kg/h

  • Product Introduction

 

Soya chunks extruder machine

 
rice extruder

There are two main methods of puffing: dry puffing and wet puffing. The specific method to be selected depends on the actual situation and the function of the puffing machine you use. The food puffing machine produced by our company can be used for both dry and wet puffing. The method to be selected depends on the moisture content of the soybeans. When the moisture content of the soybeans is high, dry puffing is conducive to the evaporation of moisture and the reduction of the moisture content of soybean powder. Wet puffing mainly passes steam through the conditioner, and the cooked material enters the puffing chamber. However, the moisture content of the product after compression puffing is high, and it must be dried and cooled. When the moisture content of soybeans is low, wet puffing can be used, because by adding steam, it is easy to condition, which can increase the output per unit time, and has a stronger destructive effect on some anti-nutritional factors, which can further improve and increase the nutritional value of soybean powder.

 

Puffed food refers to food that is made by expanding grain raw materials into shapes such as cakes and balls under high temperature and high pressure. Puffed food is crispy, soft, and easy to digest, and is deeply loved by the public. Rice and corn are common puffed food raw materials.
1. Prepare the raw materials: Select high-quality rice or corn, wash and peel them.
2. Prepare the puffing machine: Connect the puffing machine to the power supply, turn on the preheating function, and wait for about 5-10 minutes.
3. Start puffing: Put the prepared raw materials into the puffing machine, follow the instructions of the puffing machine, and start the puffing process. After puffing, collect the food and package it.

small corn puff extruder machine
Model Installation power Power consumption production capacities sizes
60 85,97 KW 56kw 100-160kg/h 34500*2000*2600mm
65 88,56 KW 57kw 100-160kg/h 35500*2000*2600mm
70 119,06 KW 82kW 200-250kg/h 35600*2000*2800mm
Corn puff extruder
 

 

1. Rice puffing formula:
Raw materials: 500g high-quality rice, 700g water.
Production process: Wash the rice and soak it in water for more than 5 hours until the rice fully absorbs water. Then take out the rice and put it into the puffing machine for puffing.
2. Corn puffing formula:
Raw materials: 500g high-quality corn, 1000g water, 5g salt, 5g sugar.
Production process: Wash the corn, add it to water, add appropriate amount of salt and sugar, and stir evenly. Then boil the corn water and cook it on low heat for about half an hour until the corn becomes soft. Dry the corn and put it into the puffing machine for puffing.

puffed corn extruder
 

1. When using the extruder, you should pay attention to the safe use of the extruder to avoid accidents.
2. During the production process, the proportion of raw materials should be controlled, otherwise it is easy to cause incomplete or unsuccessful extrusion.
3. When collecting extruded food, you should pay attention to the cleanliness of the collection container to prevent the food from being contaminated by other undesirable substances.
In short, mastering the use and formula technology of rice and corn extruders can make delicious and healthy extruded foods, and at the same time can provide a new idea and direction for everyone's entrepreneurship and business operations.

snack food extruder
Our Advantages

 

150

+

Number Of Employees

3000㎡+

Factory Area

10

+

Years Of Experience

800㎡+

Company Area

 

Puffed food extruder

 

 

In addition to the warm-up time, the following points should be noted when using the grain puffing machine:
1. Add materials evenly, not too much or too little. Too much will cause the machine to be overloaded and easily damage the machine body; too little will affect the heating effect.
2. Control the temperature moderately, not too high or too low. Too high will cause the puffed food to burn, and too low will affect the puffing effect.
3. After processing, the machine should be cleaned in time to prevent residue accumulation from affecting the next processing.

 

Qualification & Honor

 

Qualification & Honor

 

Customer visits

 

Customer visits

 

 

 

 

Hot Tags: snack food extruder machine, China snack food extruder machine manufacturers, factory, food extruder for soy products, food extruder for candies, food extruder for food carbon footprint reduction, food extruder for rolls, food extruder machine molds, leasing food extruder machine

Send Inquiry

(0/10)

clearall