Snack Puffing Machines
Model
LYS-65 LYS-70 LYS-85 LYS-95
Power
5.5kw 15kw 18.5kw 22kw
Capacity
50 kg/h 150kg/h 200-300kg/h 400-500kg/h
- Product Introduction
Product Introduction
A popcorn production line is a series of machines that process corn kernels into popcorn. The process involves heating the kernels until they explode, releasing the starch inside that turns into popcorn. This popcorn production equipment line can produce the popcorn with caramel coating and a yummy taste . It has high heating performance, low running cost and strong flexibility have earned good praise and favor from the public.
Product Parameters
|
Model |
Power |
Capacity |
Heater |
Dimension(mm) |
Weight |
|
LYS-65 |
5.5kw |
50 kg/h |
1 kw |
1720*870*1050 |
350 kg |
|
LYS-70 |
15kw |
150kg/h |
1 kw |
1720*970*1250 |
500 kg |
|
LYS-85 |
18.5kw |
200-300kg/h |
2 kw |
1360*1870*850 |
650 kg |
|
LYS-95 |
22kw |
400-500kg/h |
2 kw |
2300*1170*1400 |
850 kg |

This kind of equipment has become more and more widely used. Because of its simple and convenient operation, it has become a way for many people to get rich.
Everyone is no stranger to puffed snacks. And everyone knows puffed foods. Nowadays, there are many different puffed snacks in large and small supermarkets. Most of which are made using puffing mechanism. With the continuous development of puffed snack. This kind of equipment has become more and more widely used. Because of its simple and convenient operation, it has become a way for many people to get rich.
Maintenance
1. Extruded raw materials should be screened to prevent foreign matter such as metals from entering the machine and damaging the barrel and twin screw.
2. It is strictly forbidden to use a hard hammer during disassembly and assembly of vulnerable parts. And it is strictly forbidden to place heavy objects or stand people on the expansion cavity.
3. When shutting down for a long time without using or replacing puffed materials, the materials in the puffing cavity should be removed to avoid agglomeration, mildew or cross-contamination between materials.
4. The housing bearings and gears should be filled with oil in time. During operation, the housing bearings and gears are always lubricated. Appropriate amount of engine oil should be added for pre-production lubrication before the operation of the new machine. After a period of normal production and operation. The oil for lubricating the box bearings and gears should be replaced with new oil to avoid excessively dirty engine oil and damage to the bearings and gears.
5. Since the thread section of the wearing parts near the discharge port wears relatively quickly. The thread section of the wearing parts near the feed port wears less. So when replacing the wearing parts, you should start from the discharge end. Replace one by one. It is
not advisable to replace multiple parts at once.

FAQ
Q:What is your terms of payment ?
A: 30% T/T in advance , 70% balance before shipment after inspection.
Q: How about the after-service?
A: We will send 1 engineer to the buyer's factory for 7-14 days period installation and training to the operators.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors

Hot Tags: snack puffing machines, China snack puffing machines manufacturers, factory, food extruder for food ecology project, food extruder for large scale production, food extruder for pet food cereals, food extruder machine manual, food extruder machine instruction, food extruder for food traceability












