Soy Extruder

Model
LYS-65 LYS-70 LYS-85 LYS-95
Power
5.5kw 15kw 18.5kw 22kw
Capacity
50 kg/h 150kg/h 200-300kg/h 400-500kg/h

Send Inquiry

Product Introduction

Product Introduction

The extruder comprises a hollow tube, a screw-drill, and a die, which is attached to one end. Soybeans are loaded into the extruder barrel and forced through a rotating screw, which exposes the beans to heat high pressure, and shear forces.

Product Parameters

Model	Power	Capacity	Heater	Dimension(mm)	Weight
LYS-65	5.5kw	50 kg/h	1 kw	17208701050	350 kg
LYS-70	15kw	150kg/h	1 kw	17209701250	500 kg
LYS-85	18.5kw	200-300kg/h	2 kw	13601870850	650 kg
LYS-95	22kw	400-500kg/h	2 kw	230011701400	850 kg

Raw materials preparation
In order to prepare raw soybeans for extrusion or expression, the first step is to select clean, high-quality seeds and ensure the whole batch is free from any contamination. So, the beans need to be dried up to about 8 – 10% moisture content to get the best extrusion quality from the extruder. This can be achieved through natural or mechanical means.

The adverse effects, such as incomplete extrusion or nutrient destruction, will also be avoided by proper drying. After moisture content has been adjusted, the soybeans should be crushed or milled to supply a uniform-sized feed to the extruder. This preparatory stage is crucial to obtain a homogenous and smooth flow during the entire extrusion process without loss of the nutritional values of the finished product once this data gets exposed to the final product.

FAQ

Q:What is your terms of payment ?
A: 30% T/T in advance , 70% balance before shipment after inspection.
Q:do you supply any formula to buyer?
A: yes, we supply formulas to buyer.