Electric Peanut Butter Grinder
Also pay attention to operating safety when operating the peanut butter machine.
- Product Introduction
Equipment for making peanut butter Loading operation:
Inject the prepared material into the colloid mill through the feed pipe, and turn on the power switch to start the equipment. During the loading process, it is necessary to add the batching liquid in time to maintain the humidity of the material. During the loading process, it is also necessary to check the state of the material in time, and if necessary, adjust the speed and feed amount of the colloid mill in time.
Adjust the roller gap between the colloid mill rollers
In order to ensure that the material can be evenly dispersed between the colloid mill rollers, it is necessary to adjust the roller gap between the colloid mill rollers in time. The method of adjusting the roller gap is generally adjusted by a hydraulic cylinder or a spiral adjustment mechanism. Different materials require roller gaps of different sizes, and generally they should be reasonably adjusted according to the characteristics of the specific materials.
Grocery store peanut butter machine
| model | capacity | power | No-load speed | size |
| 50 | 0.005-0.3t/h | 1.5kw | 2900r/min | 600*300*700mm |
| 85 | 0.2-2t/h | 5.5kw | 2900r/min | 800*350*950mm |
| 130 | 0.2-4t/h | 7.5kw | 2900r/min | 900*400*1000mm |
| 180 | 0.8-6.0t/h | 15kw | 2900r/min | 1100*500*1100mm |
| 210 | 4-15t/h | 22kw | 2600r/min | 1200*500*1400mm |
Fresh ground peanut butter machine Cleaning:
During the use of the colloid mill equipment, the equipment needs to be maintained and cleaned regularly. Specifically, it is necessary to remove dust, rust, and lubricate each part of the equipment. At the same time, the equipment needs to be inspected and maintained regularly to avoid equipment failure.
Through the introduction of this article, I believe that beginners have a deeper understanding of the use and operation skills of the colloid mill. The correct use of colloid mill equipment can not only improve the dispersion and crushing efficiency of materials, but also extend the service life of the equipment, so everyone must operate in accordance with the specifications in actual operation.
Ground nuts grinding machine
Grinder to make peanut butter Classification:
Here we mainly introduce the vertical and split, horizontal colloid mills with low height and vertical high. The horizontal type should consider the design of axial positioning to prevent the motor shaft from axially penetrating and hitting the teeth. It is best to use the front cover bearing of the motor, because the axial thermal expansion of the motor rotor and shaft will move from the front bearing key of the motor to the rear bearing of the motor to reduce the impact on the grinding head gap.
The vertical colloid mill is installed vertically, and the dead weight of the motor rotor will prevent the motor shaft from axially penetrating, so axial positioning can be ignored. The horizontal colloid mill is installed horizontally. If the discharge port is upward, a discharge valve should be set below the discharge port to discharge the material in the colloid mill during long-term shutdown. The design of the anti-fouling plate should consider the dead weight reflux of the dirty material, which is not required for the vertical type.
Customer visits
Hot Tags: electric peanut butter grinder, China electric peanut butter grinder manufacturers, factory, peanut butter conveyor line, peanut butter balances, Peanut Butter Milling Machine, peanut butter warehousing system, peanut butter analysis system, peanut butter screens
