Intelligent Automatic Jam Machine
Model
130 160 180
Outer Size
700 975 975
Weight (kg)
280 350 380
- Product Introduction
Product Introduction
The core components of the colloid mill include the stator and the rotor. The fineness of the material can be controlled by adjusting the gap between the stator and the rotor. When using it for the first time, it is recommended to start with a larger gap and gradually reduce it to a suitable position. During specific operation, loosen the fastening device and adjust the gap through the adjustment device (such as an adjustment disk or a dial). Turning the adjustment device counterclockwise will increase the gap and make the material particles coarser; turning it clockwise will reduce the gap and make the material particles finer.
Product Parameters
| model | capacity | power | No-load speed |
| 50 | 0.005-0.3t/h | 1.5kw | 2900r/min |
| 85 | 0.2-2t/h | 5.5kw | 2900r/min |
| 130 | 0.2-4t/h | 7.5kw | 2900r/min |
| 180 | 0.8-6.0t/h | 15kw | 2900r/min |
| 210 | 4-15t/h | 22kw | 2600r/min |
The speed of the colloid mill will also affect the grinding fineness. The higher the speed, the stronger the shearing and grinding of the material, and the finer the particles ground. However, too high a speed may increase the wear and energy consumption of the equipment, so the appropriate speed should be selected according to the actual situation.
The size of the material flow rate will also affect the grinding fineness. If the material flow rate is too large, the material may stay in the grinding chamber too short and the grinding may not be sufficient; conversely, if the material flow rate is too small, the equipment utilization rate may be reduced. Therefore, the material flow rate should be reasonably controlled according to production needs and material characteristics to obtain the ideal grinding fineness.
In the grinding process, the role of cooling water cannot be ignored. Appropriate cooling water temperature and pressure can help reduce the temperature of the grinding disc, improve grinding efficiency and protect the equipment. Although cooling water itself does not directly participate in the adjustment of grinding fineness, its influence on the grinding process is indirect and important.
The colloid mill uses the shear force and friction force of high-speed relative motion to crush and disperse the material into fine particles. When the material enters the grinding chamber, it is driven by the high-speed rotating rotor and is subjected to strong shearing, grinding and impact, thereby achieving the purpose of refinement.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: intelligent automatic jam machine, China intelligent automatic jam machine manufacturers, factory, peanut butter reporting process, peanut butter strainer, Peanut Butter Manufacturing Machine, peanut butter processing machine, peanut butter optimization system, peanut butter budget management process
