Corn Puff Snack Extruder Machine
Model
70 80 90
production capacities
180-200kg/h 200-240kg/h 400-500kg/h
weights
18.5 kW 22kW 30KW
sizes
1500*1360*1250 1500*1450*1250 1650*1450*1300
- Product Introduction
Corn extruder machine
The quality of puffed food machinery and equipment affects the production quality and safety of the puffed food industry, and the knives in the food machinery are in direct contact with food production and food packaging, so the selection of knives for food machinery is very important. When choosing a machine, you must try it out to see the effects of production and packaging. The quality of food machinery produced by MIKIM is guaranteed.
The wearing parts of the puffed food machinery near the discharge port wear relatively quickly, while the wearing parts near the feed port wear less. Therefore, when replacing wearing parts, they should be replaced in sequence starting from the discharge end. It is not advisable to replace multiple parts at one time. Secondly, the puffed raw materials should be cleaned to prevent foreign objects such as metal from entering the machine and damaging the parts. Check the quality of the puffing machine at any time and pay attention to replacing wearing parts.
| Model | Power | weights |
| 70 | 18,5 kW | 410KG |
| 80 | 22kW | 460KG |
| 90 | 30KW | 800KG |
Cookie dough extruder machine
Before the operation of the puffing machine, the machine head, machine core, screw and other components should be removed. It is extremely important to carefully clean the rice dirt and oil stains on the machine core and screw, dry them and reassemble them after cleaning.
When the nozzle hole fails to spray out the formed product at the initial stage of the puffing machine operation, it is often caused by the nozzle temperature being too high. The reason is that the raw material is too dry, there are foreign objects in the spiral groove, or the feeding is interrupted. The cause should be found and the fault should be eliminated according to different situations.
When the spiral groove of the puffed food machine is found to be blocked, do not stop the machine immediately. Instead, stop feeding and continue running for a while until there is a burning smell before stopping the machine. This can prevent the nozzle and spiral sleeve from being stuck. If the nozzle and spiral sleeve are stuck and cannot be removed, do not hit them hard. You can remove them from the machine body and burn them in the fire for a while before removing them. After the operation is completed and feeding is stopped, let the machine run idle for 1 minute, and stop the machine after draining all the materials in the machine. Then remove the nozzle and spiral sleeve while it is hot, flush out the spiral shaft, clean up the residue in the puffer, and dredge the spray hole for reuse. Note: Wear gloves when disassembling the machine to prevent burns.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Food extruder manufacturers
How to clean the screw sleeve of the extruder
1. Tool preparation
Brushes, extruder cleaners, clean water, etc. are needed to clean the screw sleeve.
2. Shutdown and disassembly
Before cleaning the extruder, the power must be turned off first, and the extruder must be completely shut down before cleaning. Then start to disassemble the screw sleeve, paying attention to the position of the rotor and pad inside the screw sleeve, so as to clearly carry out the next step of cleaning.
3. Spraying extruder cleaner
Spray the extruder cleaner on the surface of the screw sleeve, which can be done several times. After waiting for 5-10 minutes, use a brush to clean the dirt. Be careful not to spray the cleaner on the rotor and pad inside the screw sleeve.
4. Cleaning
Wash the surface and inside of the screw sleeve with clean water, and be careful not to pour clean water on the rotor and pad inside the screw sleeve.
5. Assembly and test machine
After cleaning, assemble the screw sleeve. When testing the machine, pay attention to whether it is assembled correctly and need to thoroughly remove the residual detergent and water.
Qualification & Honor
Customer visits
Hot Tags: corn puff snack extruder machine, China corn puff snack extruder machine manufacturers, factory, meat cutting machine, food extruder machine production rate, Puff Extruder Machine, Professional Meat Cutter, Extruder Snack Machine, Groundnut Paste Machine
