Granola Bar Production Line
Model
LYS-65 LYS-70 LYS-85 LYS-95
Power
5.5kw 15kw 18.5kw 22kw
Capacity
50 kg/h 150kg/h 200-300kg/h 400-500kg/h
- Product Introduction
Product Introduction
Basic knowledge of puffing machine
1. Puffing machine is a commonly used food processing equipment, widely used in the processing and production of rice, noodles, beans, sesame and other foods.
2. The principle of puffing in puffing machine is to heat the water inside the material into steam through high-pressure steam, and the volume expands rapidly, thereby achieving the puffing effect.
Product Parameters
| Model | Power | Capacity | Heater | Dimension(mm) | Weight |
| LYS-65 | 5.5kw | 50 kg/h | 1 kw | 1720*870*1050 | 350 kg |
| LYS-70 | 15kw | 150kg/h | 1 kw | 1720*970*1250 | 500 kg |
| LYS-85 | 18.5kw | 200-300kg/h | 2 kw | 1360*1870*850 | 650 kg |
| LYS-95 | 22kw | 400-500kg/h | 2 kw | 2300*1170*1400 | 850 kg |

Precautions for using the extruder
1. The machine must be operated correctly according to the manual and the safety operating procedures must be strictly followed.
2. Check the electrical circuit and mechanical parts of the extruder regularly to see if they are normal. If there is any fault, it must be handled in time.
3. When operating the extruder, you must always stay focused and never be distracted or leave the machine.
4. When cleaning the machine, you must first cut off the power supply to ensure safety.
5. During use, if you encounter an abnormal situation, you need to stop the machine immediately for inspection and do not force it to continue operating.
6. For the accessories and attachments of the extruder, they must be installed and used correctly according to the prescribed methods to avoid misuse and damage to the equipment.
7. Avoid using the extruder in a humid and corrosive environment to avoid affecting the life of the equipment.
The wearing parts of food puffing machinery near the discharge port wear relatively quickly, while the wearing parts near the feed port wear less. Therefore, when replacing wearing parts, they should be replaced in sequence starting from the discharge port, and it is not advisable to replace multiple parts at one time.
The box bearings should be filled with lubricating grease in time, and all lubricating grease should be replaced once after 500 hours of operation. (An appropriate amount of grease should be added before the new machine is operated, and the oil should be changed after 200 hours of operation.)

Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors

Hot Tags: granola bar production line, China granola bar production line manufacturers, factory, food puffing distribution, horizontal form fill seal packaging machine for food puffing, modified atmosphere packaging machine for food puffing, coating equipment for food puffing, oat for food puffing, competitor in food puffing market












