Meat Slicers in Store
When the machine is not running: do not touch the blade at will; when the machine is running: do not touch the blade; please use special tools and wrenches to load and unload the blade.
- Product Introduction
Raw meat slicer machine Precautions:
1. Blade
When the machine is not running: do not touch the blade at will; when the machine is running: do not touch the blade; please use special tools and wrenches to load and unload the blade.
2. Be sure to install and use the standard grounding wire.
3. No water splashes into the super thin meat slicer.
4. Do not process bone-in meat: Processing bone-in meat may cause damage to the blade and the machine.
5. The thin meat cutter cannot process frozen meat below -3℃: Do not process frozen meat below -3℃, otherwise it will cause blade damage and machine failure.
6. When the protection function is activated, eliminate the cause: After eliminating the cause that caused the protection function to be activated, start the operation again.
Food Slicer Machine

|
Model |
slicer length |
slicer width |
weight |
|
(kg) |
|||
|
Cut a roll flat |
600MM |
120MM |
80 |
|
CNC one roller |
450MM |
160MM |
160 |
|
CNC two rollers |
600MM |
270MM |
200 |
|
CNC four rollers |
600MM |
510MM |
320 |
|
CNC six rollers |
600MM |
730MM |
400 |
|
CNC eight rollers |
600MM |
920MM |
500 |
Slicer beef operation process:
Beef is one of the common ingredients, and small polony slicer is a professional beef cutting equipment. It can make cutting easier and more efficient, while ensuring the quality and hygiene of the ingredients.
Stainless steel food slicer can automatically adjust the cutting thickness, conveyor belt speed, cutting times and automatic portioning function. The thinnest can cut 1mm, bone-in or boneless frozen meat within -5℃. It is used in the production of raw steak, bacon, and batch cutting of meat slices.
First, you need to prepare the beef, then put the block beef into the slicer, set the cutting thickness on the LCD screen, and then start the stainless steel meat cutter. The raw material moves slowly along the cutting direction until all the cuts are completed without tails. After completion, clean up the residue in the slicer and use it next time.
Maintenance and maintenance of beef slicers are important ways to ensure their normal operation. First, they should be kept clean at all times, and deep cleaned regularly, all parts cleaned and oiled. In addition, the various parts of the slicer should be checked for wear and replaced in time. In addition, do not expose the beef slicer to sunlight or humid environment, otherwise it will cause machine malfunction.
Commercial Meat Cutter


Slicer equipment Summary
When using meat slicer machine to process frozen mutton, there is another advantage that is that the slicing efficiency is very high. In fact, many people may be worried about the power consumption of the slicer when using it. You can rest assured about this because this type of slicer not only has a good meat cutting effect during use, but also has a relatively low power consumption. Therefore, it can save a lot of costs during long-term use.
For large food processing plants, bacon slicer can effectively reduce the use of labor costs, and it is more efficient than manual labor and has better slicing effects than manual labor. It is a one-time investment and permanent benefit equipment. MIKIM is a food machinery manufacturer and a supplier you can trust.
Qualification & Honor

Hot Tags: meat slicers in store, China meat slicers in store manufacturers, factory, cutter for efficient meat roll slicing, meat processing slicer for meat rolls, meat roll slicing resource, supermarket meat roll slicer, slicer for efficient meat roll cutting in commercial food handling, machine for slicing commercial meat rolls












