Grinder To Make Peanut Butter
Model
80 110 130
Outer Size
520 685 700
Weight (kg)
150 175 280
- Product Introduction
Product Introduction
The main ways to adjust the grinding fineness of the colloid mill include adjusting the gap between the rotor and the stator, adjusting the speed, controlling the material flow, and optimizing the cooling water temperature and pressure. In actual operation, the appropriate adjustment method should be selected according to the characteristics of the specific material and production requirements, and attention should be paid to the coordination and balance between the various parameters to obtain the best grinding effect.
Product Parameters
| Model | 80 | 110 | 130 |
| Capacity(t/h) | 0.1-0.5 | 0.3-1.2 | 0.4-2 |
| Speed | 2890 | 2900 | 2930 |
| (m/min) | |||
| Outer Size | 520 | 685 | 700 |
| Weight (kg) | 150 | 175 | 280 |
Adjust the gap between the rotor and the stator
Loosen the fastening device: First, use a professional wrench or adjustment handle to turn the fastener counterclockwise to loosen the fastening parts that fix the rotor and the stator.
Adjust the gap: Adjust the gap between the rotor and the stator through an adjustment device (such as an adjustment disk or a dial). Turning the adjustment device counterclockwise will increase the gap and make the material particles coarser; turning it clockwise will reduce the gap and make the material particles finer. During specific operations, the gap can be gradually adjusted to a suitable position according to the characteristics of the specific material and production requirements.Fixing the gap: After adjusting the gap, use a wrench or adjustment handle to rotate the fastening component clockwise to fix the gap between the rotor and the stator.
Adjust the speed
The speed of the colloid mill is also an important factor affecting the grinding fineness. Generally speaking, the higher the speed, the stronger the shearing and grinding effect on the material, and the finer the particles ground. Therefore, the grinding fineness can be controlled by adjusting the speed of the colloid mill. However, it should be noted that too high a speed may increase the wear and energy consumption of the equipment, so the appropriate speed should be selected according to the actual situation.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: grinder to make peanut butter, China grinder to make peanut butter manufacturers, factory, Frozen Meat Cutting Machine, Puffed Food Extruder, Peanut Butter Manufacturing Machine, durable peanut butter machine, Puff Extruder Machine, Electric Meat Cutter
