Peanut Butter Mixer Machine
Model
60 80 120
Voltage
220V/380V
Power
1.5 KW 4 KW 7.5 KW
Capacity
50-500 KG/H 200-1500 KG/H 500-2000 KG/H
- Product Introduction
Product Introduction
Before disassembling the colloid mill, you need to do the following preparations:
1. Maintenance has been done: Before disassembly, you need to confirm whether the colloid mill has completed daily maintenance work, such as cleaning the colloid mill, changing grease, etc.
2. Pressure relief: Turn off the power of the colloid mill, wait for it to stop running, disassemble the feed pipe, and open the pressure relief switch to release the pressure.
3. Classification: Classify and record the disassembled parts so that they can be disassembled in reverse order.
Product Parameters
| model | capacity | power | No-load speed | size |
| 130 | 0.2-4t/h | 7.5kw | 2900r/min | 900*400*1000mm |
| 180 | 0.8-6.0t/h | 15kw | 2900r/min | 1100*500*1100mm |
| 210 | 4-15t/h | 22kw | 2600r/min | 1200*500*1400mm |
1. Disassemble the stator: Remove the motor, remove the end cover, close the stator, and carefully remove the stator as a whole.
Note: When disassembling the stator, be careful to avoid excessive force, and be careful to place it gently to avoid damaging the parts.
2. Disassemble the rotor: Remove the nut, remove the rotor bearing, and then use a special tool to remove the rotor axis.
Note: When disassembling the rotor, be careful to avoid excessive force, and be careful to place it gently to avoid damaging the parts.
3. Disassemble the casing: First remove the bottom wheel of the body, and then disassemble the camera, double cone, and self-rotating shaft inside the casing.
Note: When disassembling the casing, be careful not to damage the parts during disassembly.
4. Cleaning parts: The disassembled parts of the colloid mill must be thoroughly cleaned in a dedicated cleaning machine.
Note: Take photos of each part after disassembly, and do not lose the parts or misplace them after thorough cleaning.
5. Installing parts: After the parts are cleaned, install them back step by step in reverse order and add oil, etc.
Note: During the installation process, the position and status of each part should be confirmed to avoid forgetting or misplacing them.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: peanut butter mixer machine, China peanut butter mixer machine manufacturers, factory, peanut butter homogenizer, peanut butter safety system, peanut butter cleaner, peanut butter plugs, Nut Butter Processing Equipment, Peanut Butter Manufacturing Machine
