Whole Foods Nut Butter Machine

After removing the inlet bucket, we can find the general appearance of the grinding disc device of the rubber grinder. Generally, the static grinding disc and the dynamic grinding disc are separated by upper and lower positions, with a sealing ring in the middle and an adjusting ring on the top. At this time, use a special disassembly tool to disassemble the adjusting ring, generally by rotating it to remove it, and then we can adjust the screw or nut that fixes the static grinding disc until it is loosened and the static grinding disc can be pulled out of the rubber grinder. After that, the dynamic grinding disc is disassembled accordingly, so that the complete grinding disc of the rubber grinder can be removed.

Of course, not all rubber grinders have such a disassembly process, but the general process is like this. It is best not to disassemble all the main parts of the grinding disc of the rubber grinder. If the parts that cannot be disassembled need to be cleaned, rinse them with clean water and wipe them with a clean cloth, and dry them. As for the removable grinding disc, you can also use professional cleaning detergent to clean it. The above is the adjustment and disassembly method of the grinding disc of the rubber grinder. It should be noted here that after the rubber grinder is used, the motor should be turned off and the parts inside the machine body that contact the material need to be cleaned to avoid the wear and tear of the internal grinding disc.