Automatic Food Extruder
Model
40 50 60
production capacities
40-50kg/h 80-100kg/h 120-150kg/h
Power
5.5KW 7.5KW 15KW
- Product Introduction
Product Introduction
In order to ensure the normal operation of the extruder and avoid the rice popcorn from getting sticky, we need to make corresponding adjustments according to our needs. Adjusting the extruder can be achieved through the following aspects:
1. According to the size of the heat-resistant cup, the experience of different operators and the addition of different water, adjust the angle of the heat-resistant cup to make the grain flow out at an appropriate speed.
2. Make corresponding adjustments according to factors such as the size of the fire, the size of the particles, and the addition of water.
3. Emphasize the protection of the temperature controller to prevent the equipment from being damaged by excessive temperature.
Product Parameters
| Model | production capacities | Power | weights | sizes |
| 40 | 40-50kg/h | 5.5KW | 310KG | 1300*1200*1100 |
| 50 | 80-100kg/h | 7.5KW | 330KG | 1350*1100*1200 |
| 60 | 120-150kg/h | 15KW | 360KG | 1350*110*1200 |
First of all, we need to ensure the quality of the grains added to the extruder. If the moisture content of the grains is too high or too low, it will affect the working effect of the extruder. Therefore, before adding the grains, the grains should be screened and cleaned to ensure the quality of the grains. At the same time, we can also increase the moisture content of the grains appropriately for better extrusion.
The temperature of the extruder is one of the important factors in making rice popcorn. Too high or too low temperature will affect the quality of rice popcorn. Therefore, we need to adjust the temperature appropriately according to the type and moisture content of the grains to maintain a stable temperature of the extruder.
When using the extruder, the pressure and rate of the extruder should be adjusted appropriately according to the type and quality of the grains. Too high pressure will cause the grains to explode, and too fast a rate may cause the rice popcorn to burn or burn. Therefore, we need to adjust the pressure and rate appropriately and make fine adjustments according to the actual situation.
When using an extruder to make popcorn, in order to avoid the popcorn from getting sticky, we need to pay attention to the following points:
1. Keep the heating steady and avoid heating too early.
2. Control the amount of water added to avoid adding too much water.
3. Properly adjust the pressure and speed of the extruder to maintain a stable state.
4. Pay attention to protecting the temperature controller to prevent excessive damage to the equipment.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: automatic food extruder, China automatic food extruder manufacturers, factory, Meat With Bone Cutter, Electric Slicer For Meat, Industrial Frozen Meat Slicer, food extruder machine spare parts, Groundnut Butter Machine, Puffed Food Extruder
