Extruded Snacks Production Machine
Model
40 50 60
production capacities
40-50kg/h 80-100kg/h 120-150kg/h
Power
5.5KW 7.5KW 15KW
- Product Introduction
Product Introduction
When the peanut butter machine is in use, the gap between the rotor and the stator is adjusted according to the characteristics of the specific material, flow requirements, particle size and coarseness. After the gap is controlled, the fastening parts that fix the rotor and the stator are rotated clockwise to fix them. Add materials for shearing, grinding, homogenization, emulsification and other production and processing.
Product Parameters
| Model | Installation power | Power consumption | Efficiency | sizes |
| 60 | 85,97 KW | 56kW | 100-160kg/h | 34500*2000*2600mm |
| 65 | 88,56 KW | 57kW | 100-160kg/h | 35500*2000*2600mm |
| 70 | 119,06 KW | 82kW | 200-250kg/h | 35600*2000*2800mm |
Feeding speed is also one of the key factors affecting the size of the feed. If the feeding speed is too fast, the feed will be larger; if the feeding speed is too slow, the feed will be smaller. Therefore, when adjusting the feed size of the extruder, you can consider adjusting the feeding speed. The specific method is as follows:
1. Turn off the power of the extruder and open the upper and lower cage covers.
2. Adjust the feeding speed to the required size through the feed regulating valve.
When using this method to adjust the feed size, you need to pay attention to the adjustment range of the feeding speed, and adjust it gradually during the adjustment process to avoid feed blockage or loss.
The temperature of the extruder can also affect the size of the material. Generally speaking, the higher the temperature, the larger the material will be; otherwise, the smaller it will be. Therefore, when using the extruder, the size of the material can be adjusted by controlling the temperature.
The specific operation process is as follows:
1. Turn off the power of the extruder and open the upper and lower cage covers.
2. Use the temperature controller to adjust the temperature to the required range.
When using this method to adjust the size of the material, you need to pay attention to the temperature adjustment range, and the temperature range should not be too large or too small. If the temperature is too high, it will cause the material to deform or burn; if the temperature is too low, it will affect the puffing effect.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: extruded snacks production machine, China extruded snacks production machine manufacturers, factory, food extruder for low fat bakery products production, best price food extruder machine, food extruder machine feedback, food extruder for confectionery, food extruder for dried fruits, food extruder for candies
