Corn Chips Puffing Machine

Model
40 50 60
production capacities
40-50kg/h 80-100kg/h 120-150kg/h
Power
5.5KW 7.5KW 15KW

Send Inquiry

Product Introduction

Product Introduction

An extruder is a machine that heats and pressurizes food or raw materials to make them undergo physical or chemical changes, so that the finished product has characteristics such as crispness and softness. Usually, the speed of the extruder is relatively fast, but sometimes it is necessary to slow down the speed of the extruder to achieve better results.
The core part of the extruder is the extrusion chamber. The raw materials in the extrusion chamber undergo physical changes under high temperature and pressure, and are expanded into crispy food. The speed of the extruder is usually affected by two aspects: equipment parameters and operation mode. The following introduces how to adjust the speed of the extruder through these two aspects.

Product Parameters

Model	Capacity	Power	Weight
MK-40	40-50KG/H	5.5KW	310KG
MK-50	80-100KG/H	7.5KW	330KG
MK-60	120-150KG/H	15KW	360KG
MK-90	400-500KG/H	30KW	800KG

1. The temperature of the extruder. The temperature of the extruder is an important factor affecting the extrusion speed. Generally speaking, the higher the temperature, the faster the extrusion speed, and vice versa. Therefore, if you need to slow down the speed of the extruder, you can lower the temperature of the extruder, but it should be noted that the temperature cannot be lower than a certain range.
2. The pressure of the extruder. The pressure of the extruder will also affect the extrusion speed. Generally speaking, the higher the pressure, the faster the extrusion speed. Therefore, the extrusion speed can be slowed down by adjusting the pressure of the extruder.

1. Reduce the feed amount. One reason for the high speed of the extruder is that the raw materials enter too quickly. Therefore, the extrusion speed can be reduced by reducing the feed amount.
2. Increase the discharge amount. While speeding up the discharge amount, the extrusion speed can also be reduced. This is because the faster the discharge, the faster the pressure in the extrusion chamber drops, thereby slowing down the extrusion speed.
The above is the basic method on how to adjust the speed of the extruder. It should be reminded that the speed of the extruder must be adjusted appropriately according to production needs and equipment specifications, otherwise it will affect product quality and equipment life.