Corn Flakes Puffing Machine
Model
40 50 60
production capacities
40-50kg/h 80-100kg/h 120-150kg/h
Power
5.5KW 7.5KW 15KW
- Product Introduction
Product Introduction
The extruder is a device that uses heat and pressure to expand raw materials such as starch and protein into puffed food in a short time. Its basic working principle is: add the raw materials into the extruder, then heat and pressurize it to make it expand instantly inside, thus expanding it into various forms of food.
The temperature of the extruder is one of the key factors. Too high or too low will affect the puffing effect. Therefore, the temperature needs to be adjusted appropriately according to the type of raw materials and puffing requirements during use. It is usually recommended to control the temperature at around 160℃ and not exceed 200℃.
Product Parameters
| Model | production capacities | Power | weights | sizes |
| 40 | 40-50kg/h | 5.5KW | 310KG | 1300*1200*1100 |
| 50 | 80-100kg/h | 7,5 kW | 330KG | 1350*1100*1200 |
| 60 | 120-150kg/h | 15kW | 360KG | 1350*110*1200 |
| 70 | 180-200kg/h | 18,5 kW | 410KG | 1500*1360*1250 |
| 80 | 200-240kg/h | 22kW | 460KG | 1500*1450*1250 |
When the spiral groove is blocked, do not stop the machine immediately. Let it idle for a while and wait until you smell a burning smell before stopping it. This is mainly to prevent the nozzle and spiral sleeve from biting.
After the operation is completed and the feeding is stopped, let the corn equipment extruder idle for 1 minute, and then stop the machine after draining the material in the machine. Then remove the nozzle and spiral sleeve while it is hot, flush out the spiral shaft, clean the residue in the machine, and dredge the spray hole for reuse.
By using the extrusion and propulsion of the unequally spaced non-standard screw system of the extruder, the gas in the material is discharged and quickly filled with the material. The material is subjected to shear force and refluxes, which increases the pressure in the machine chamber. With the friction between the screw and the machine chamber, the material is fully mixed, extruded, heated, glued, and gelatinized, resulting in organizational changes and the original structure is destroyed.
The finished product is made thin and crispy, and it can be driven by a motor or a gasoline engine or a diesel engine.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: corn flakes puffing machine, China corn flakes puffing machine manufacturers, factory, food extruder for food enhancement initiative, reliable food extruder machine manufacturer, food extruder for ready-to-eat food production, food extruder machine trader, food extruder for food expansion, food extruder for extruded pasta
