Cookie Extruder Machine
Model
80 90 135
production capacities
200-240kg/h 400-500kg/h 500-700kg/h
Power
22kW 30KW 55kW
- Product Introduction
Extruder for food
First, by observing the feeding port of the extruder, you can preliminarily judge whether the amount of material is sufficient. The feeding port should be kept unobstructed, and the material should enter the extruder evenly and continuously. If the feeding port is found to be blocked or the material flow is not smooth, it may mean that the amount of material is insufficient or excessive. At this time, it is necessary to adjust the feeding speed or clean the feeding port in time.
Secondly, by adjusting the equipment parameters of the extruder, the material quantity can be controlled more accurately. This includes adjusting the feeding speed, extrusion temperature, extrusion pressure and other parameters. During the adjustment process, it is necessary to gradually find the most suitable parameter combination according to the properties of the material and production requirements. At the same time, it is also necessary to pay attention to the safe operating procedures of the equipment to avoid equipment damage or production accidents caused by improper parameter adjustment.
| Model | production capacities | Power | weights | sizes |
| 80 | 200-240kg/h | 22kW | 460KG | 1500*1450*1250 |
| 90 | 400-500kg/h | 30KW | 800KG | 1650*1450*1300 |
| 135 | 500-700kg/h | 55kW | 1200KG | 1800*1550*1500 |
Extruder in food industry
In addition, the amount of material can also be indirectly determined by monitoring the equipment status of the extruder. For example, observe whether the equipment's operating current, voltage and other parameters are normal, and whether there are abnormal noises or vibrations. If the equipment status is abnormal, it may mean that the amount of material is too much or too little, and it is necessary to stop the machine in time for inspection and adjustment.
During operation, the following points should also be noted:
1. Regularly check the feeding system of the extruder to ensure that the feeding port is unobstructed and the feeding device is operating normally.
2. Observe the discharge of the extruder at any time, and judge whether the material quantity is appropriate based on the discharge speed and product quality.
3. Adjust the parameter settings of the extruder in time according to production needs to ensure that the material is fully processed during the extrusion process.
4. Pay attention to the maintenance of the equipment, regularly clean the dust and debris inside and outside the equipment, and keep the equipment clean and hygienic.
In short, the process of judging the material quantity of the extruder needs to comprehensively consider multiple factors, including the feeding port situation, equipment parameter adjustment and equipment status monitoring. By mastering these operating skills and precautions, we can better use the extruder, improve production efficiency and ensure product quality.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Extruder snack
The feed port and discharge port of the equipment are both connected by pipelines. The materials are directly subjected to multifunctional automatic integrated continuous production processes such as ultrafine particle crushing, dispersion, emulsification, depolymerization, homogenization, mixing, grinding and transportation through pipeline lines.
Active washers are arranged behind the adjusting disk and in front of the stator to replace the traditional plane and bearing sliding effect, reduce the movable tolerance of the adjusting disk, and in the absence of lubricating oil, the adjusting disk is flexible to adjust, with simple structure, high precision and good stability.
Power transmission: During operation, the machine rotates at high speed to generate mechanical centrifugal force output pressure (lift) which can be used as the power of the pump. It has the function of conveying materials at the same time and saves energy. It runs at a high line speed of 30-50r/S.
Qualification & Honor
Customer visits
Hot Tags: cookie extruder machine, China cookie extruder machine manufacturers, factory, Puffed Food Extruder, food extruder for food ecology project, Extruder Snack Machine, Peanut Butter Milling Machine, Electric Meat Cutter, Frozen Meat Cutting Machine
