Puff Extruder
Model
80 90 130
Power
22kW 30KW 55kW
weights
460KG 800KG 1200KG
sizes
1500*1450*1250 1650*1450*1300 1800*1550*1500
- Product Introduction
Soybean extruder machine

The extruder needs a higher temperature when working. Too low a temperature will make the food puffing effect poor or even impossible. Therefore, if the problem of the extruder not being crispy occurs, you first need to check whether the temperature meets the requirements. Different extruder temperatures need to be set for different ingredients. Generally, it needs to be above 180℃ to ensure successful puffing.
Excessive humidity will also affect the puffing effect of the extruder, because it is difficult for high-moisture raw materials to reach the ideal temperature and pressure after entering the equipment, resulting in poor puffing. Therefore, before operating the extruder, it is necessary to ensure that the raw materials are dry enough and to ensure the relative dryness inside the equipment by controlling the ambient humidity.
The pressure inside the extruder is also one of the important factors affecting the crispness of the extruder. If the pressure inside the equipment is insufficient, the ingredients cannot achieve the ideal puffing effect, resulting in poor puffing. At this time, it is necessary to check the pressure of the extruder, the air source pressure and other parameters to ensure that the pressure inside the equipment meets the requirements.

| Model | production capacities | Power | weights | sizes |
| 80 | 200-240kg/h | 22kW | 460KG | 1500*1450*1250 |
| 90 | 400-500kg/h | 30KW | 800KG | 1650*1450*1300 |
| 135 | 500-700kg/h | 55kW | 1200KG | 1800*1550*1500 |
Twin screw food extruder
Different ingredients are suitable for different extruders. If you choose inappropriate ingredients, the extrusion effect will be affected. For example, excessive pressure, low temperature, high humidity, etc. will affect the extrusion effect. Therefore, when choosing ingredients, you need to choose the right ingredients according to different process parameters.

During long-term use, the extruder will suffer from wear and corrosion, which may cause the extrusion effect of the equipment to decline or even fail. Therefore, it is necessary to regularly maintain the equipment and replace aging and damaged equipment parts. At the same time, it is necessary to pay attention to the cleanliness and hygiene of the equipment when using and keeping it, and ensure that the sanitary environment inside the equipment is excellent.

Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Soya chunks extruder machine
The machine shall not be stopped arbitrarily during the processing, otherwise the screw, screw sleeve and machine head nut will stick, the machine cannot operate, and it will be difficult to disassemble. The feed port cannot allow puffed fruit and other impurities to enter. If found, remove them immediately with a small wooden stick (do not use an iron rod).
If the puffed fruit suddenly does not come out during processing, it means that the rice has too much moisture, and the water vapor makes the rice clump and blocks the outlet. The rice clump should be removed immediately with a small wooden stick (do not use an iron rod).
If the puffed fruit comes out with one side and without the other side, it means that the core is not placed properly or there are small stones in the rice blocking the outlet. The amount of rice should be appropriately increased or the core at the outlet should be knocked from the direction of nothing to the direction of something with a hammer.
Qualification & Honor

Customer visits

Hot Tags: puff extruder, China puff extruder manufacturers, factory, food extruder for food revolution, Extruder Snack Machine, food extruder manual, food extruder for ready to eat pasta production, food extruder for candies, food extruder for extruded confectionery












