Full Fat Soya Extruder Machine
Model
MK-40 MK-60 MK-90
Power
5.5KW 15KW 30KW
Weight
310KG 360KG 800KG
- Product Introduction
Small protein bar extruder

The reason why the puffed food is not cooked and bubbles appear is because there are some problems in the processing. The following are common reasons:
1. The temperature is not high enough or the insulation time is insufficient: In the processing of puffed food, temperature and time are very important factors. If the temperature is not high enough or the insulation time is insufficient, it will lead to insufficient puffing and failure to bubble.
2. Extruder failure: Extruder failure is also a cause of insufficient expansion. It may be caused by damage to the heating tube, inconsistent heating temperature, etc., which requires timely repair.
3. Poor quality of raw materials: The raw materials of puffed food are the key to affecting the puffing effect. If the raw materials are of poor quality or improperly stored, it will lead to insufficient expansion.

| Model | production capacities | Power | weights | sizes |
| 40 | 40-50kg/h | 5.5KW | 310KG | 1300*1200*1100 |
| 50 | 80-100kg/h | 7.5 kW | 330KG | 1350*1100*1200 |
| 60 | 120-150kg/h | 15kW | 360KG | 1350*110*1200 |
| 70 | 180-200kg/h | 18.5 kW | 410KG | 1500*1360*1250 |
small corn puff extruder machine
Effective solution to the problem of bubbling when the puffing machine is not cooked
1. Control the temperature and insulation time: When processing puffed food, be sure to control the temperature and insulation time to allow the puffed food to fully expand and bubble successfully.
2. Check the puffing machine equipment: Regularly check whether the puffing machine equipment is operating normally, repair damaged equipment, ensure consistent heating temperature, and avoid mechanical failures.

3. Improve the quality of raw materials: select high-quality raw materials, avoid using damp or moldy raw materials, and strictly control the quality of raw materials.
4. Adjust the parameters of the extruder: adjust the parameters of the extruder, such as temperature, pressure, gas volume, etc., according to different types of extruded foods to achieve the best extrusion effect.
5. Strengthen personnel training: provide technical training for processing personnel on extruded foods, improve the skills and operating specifications of employees, and thus effectively improve the quality of extruded foods.

Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Single screw food extruder
Safety first: When adjusting the extruder, be sure to follow the operating procedures to ensure that the equipment is in a safe state. It is strictly forbidden to perform any adjustment operations while the equipment is running.
Gradually adjust: The adjustment should be carried out step by step to avoid excessive adjustments at one time, which may cause the equipment to lose control or unstable product quality.
Trial run: After each adjustment, a trial run should be carried out to observe whether the extrusion effect meets the expectations. If necessary, the parameters can be further adjusted.
In short, by reasonably adjusting the parameters of the extruder such as temperature, pressure and material flow, we can obtain better extrusion effects. At the same time, pay attention to safety during the adjustment process, follow the operating procedures, and ensure stable operation of the equipment.
Qualification & Honor

Customer visits

Hot Tags: full fat soya extruder machine, China full fat soya extruder machine manufacturers, factory, food extruder for food competitiveness, food extruder for food community building, food extruder for food customization, food extruder for food revelation, food extruder for local food production, food extruder for confectionery












