Fish Slicer

Voltage
220V/380V
Capacity
300pcs/min
Power
1500W
Size
800x800x950mm

Send Inquiry

Product Introduction

Product Introduction

Before adjusting the slicer temperature, you first need to understand the slicer's temperature range. Generally speaking, the slicer's temperature range is between 0°C and 10°C. There may be some differences between different models of slicers. You need to check the user manual or contact after-sales service personnel to confirm.

Product Parameters

Voltage	220V/380V
Capacity	300pcs/min
Power	1500W
Size	800x800x950mm
Weight	280kg
Slice thickness	1.5mm
Slice width	100mm
Slice length	400mm

Many slicers are equipped with a control panel, which can be used to adjust the slicer's temperature. The specific operation method is as follows:
- First, plug the slicer into the power supply to turn it on;
- Then follow the instructions on the control panel to select the temperature adjustment option;
- Finally, adjust the temperature setting value, which can generally be set through the touch screen, buttons, etc. After the adjustment is completed, wait for the slicer to automatically adjust the temperature.

The working environment temperature of the slicer will also affect the temperature. If the room temperature is too high or too low, it will affect the temperature regulation of the slicer. Therefore, the temperature of the slicer can be regulated by reasonably adjusting the room temperature.
- If the room temperature is too high, it can be cooled by turning on the air conditioner or using a fan.
- If the room temperature is too low, a heater or other heating tool can be used to increase the indoor temperature.