Meat Dicing Machine
Product
Beef Cutting Machine
Power
2.2-3KW
Capacity
500-800KG/H
Dimension
1300*690*970mm
- Product Introduction
Raw Meat Dicing Machine
The automatic bone saw allows you to not have to go through the hustle and bustle of food processing. The automatic bone saw is a well-designed machine that can be used to simplify a variety of commercial and home food processing. It is indispensable for butcher shops, meat processing plants, steakhouses, or other places that handle large cuts of meat. It can quickly cut through tough bones and thick cuts of meat. In addition, the electric blade provides a more accurate cut than a butcher's manual cutter.
In addition to being powerful, each bone saw machine is designed with safety in mind. These saws are equipped with large, easy-to-use buttons that can be turned off with a single click. Each commercial bone saw can be conveniently placed on your countertop or equipment stand.
Choose models with different power to meet your low- or high-volume needs. The saws are available in different blade sizes. Use this machine to quickly, easily, and accurately chop cuts of meat and cut a variety of meats for easy portioning and presentation in your butcher or deli. Its cast aluminum body construction ensures sturdiness and weight, while its stainless steel worktop typically provides long-lasting performance under regular use.
| Product | Beef Cutting Machine |
| Power | 2.2-3KW |
| Capacity | 500-800KG/H |
| Dimension | 1300*690*970mm |
| Weight | 230kg |
Beef cutter
The bone saw machine is a food processing machine specially designed for cutting frozen meat and bones into small pieces. The bone saw machine has the characteristics of stable performance, high efficiency, low energy consumption, safety and ease of use.
1. Check whether the power supply voltage meets the specified requirements. The power wiring should be firm and reliable, and the power socket should be firmly grounded.
2. If there is no power socket with a plug, it should be connected to a full-level disconnect device, and the user should install it in a fixed position with a contact opening distance of at least 3mm. The rated current of the circuit breaker should be greater than or equal to 35A.
3. The machine must be placed on a horizontal surface or desktop. The height of the machine body can be adjusted by one foot below.
When the saw belt needs to be installed, open the door and remove the long lever handle on the workbench. The teeth of the band saw blade are installed on the pulley forward, and all the teeth are stuck in the groove.
Tighten the saw belt by turning the knob on the right side of the column in the direction of the mark. Adjust the tension of the saw belt so that the saw bone does not slip. Over-tightening will affect the service life of the saw belt. If it is too loose, it will not work properly.
Adjust the adjustment bolts on the back of the upper box and the column (located in the box body respectively), adjust the inclination and inclination of the two driven pulleys, so that the saw belt will not fall when installed. The desktop bone saw machine has been tested and the rear of the saw belt does not match the limit bearing. Until friction occurs. Turn the adjustment bolt clockwise, the saw belt pulley tilts back, the saw belt pulley tilts back, and the adjustment bolt rotates counterclockwise, and the saw belt pulley tilts forward.
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Poultry Cutting Machine
Maintenance:
1. Clean the machine once before each use. Use clean water to wash the saw belt and each working part. Clean the machine carefully after use, open the lid, clean the bone residues and minced meat on the workbench, pulleys, meat collection box, etc. to ensure food hygiene. Note: Do not rinse the machine directly with water.
2. Long-term use of the saw belt may cause wear or damage. Please replace the saw belt regularly. If you replace the saw belt, please use original accessories.
3. Turn off the power before performing all maintenance work. Note: The saw belt is a consumable part and is not covered by the warranty.
Qualification & Honor
Customer visits
Hot Tags: meat dicing machine, China meat dicing machine manufacturers, factory, meat cutting machine for large quantities, meat cutting machine for handling events, meat cutting machine for bone in meats, meat cutting machine for maximizing events, meat processing machine for smokers with meat, meat cutting machine for slow cooking events
