video

Mutton Chopping Machine

Model
MK-600
Voltage
220V
Power (kw)
2.2kw / 3kw

  • Product Introduction

 

Meat cutting machine

 
butcher meat cutter

Meat slicer operation steps:
1. Make sure the meat slicer is fully charged.
2. Put the meat to be cut into the machine and make sure the meat is placed on the cutting board.
3. Press the start button and the meat slicer starts working.
4. The cutting speed and cutting depth of the meat slicer can be set as needed.
5. When the meat is cut, the machine will stop automatically.
6. Take out the cut meat and be careful not to put your hands into the machine to avoid injury.
7. Clean the meat slicer and make sure the inside of the machine is clean and hygienic.

 

First, you need to prepare the household meat slicer and the meat to be cut. Clean the meat and wipe the surface moisture with kitchen paper.
There are a variety of cutting blades that can be replaced inside the household meat slicer, and you need to choose the corresponding blade according to different meats. Adjust the slice thickness regulator to the required position to control the thickness of the slice.
Put the prepared meat into the feed port of the meat slicer and press it with your hand to make the meat close to the cutting blade. Turn on the power, press the switch, and start slicing. Be careful not to get your hands close to the cutting part to avoid danger.
After using the household meat slicer, clean the cutting blade and the machine body immediately to avoid leaving food residues to contaminate the machine. At the same time, some detergents can be used to disinfect and clean the machine. Store the cutting blade in a special box to protect the blade from damage.

cube meat dicing machine
Model MC-600
Voltage 220V
Power (kw) 2.2kw / 3kw
Capacity (kg/h) 600 kg/h
Dimension(cm) 130*70*85 cm
Weight (kg) 260 kg
Cutting cube size(mm) 20*50mm
meat saw machine
 

 

Safety debugging
1. Place the machine on a horizontal work surface to ensure that the machine works stably and reliably.
2. Check whether the screws on the machine are loose and whether there are foreign objects. Clean them up to avoid damage to the tool.
3. Test the knife before working to see if the cutting specifications are consistent with your requirements. Otherwise, adjust the thickness and work normally after meeting the requirements.

electric bone cutter
 

When the machine is working, check whether there is lubricating oil in the two oil cups. If not, please fill it with lubricating oil.
Turn on the power to check whether the motor rotation direction is consistent with the rotation direction required by the machine. Every time the cutter is raised to the highest position, the feed plate is pushed forward, and the motor direction is correct. On the contrary, when the cutter falls to the lowest position, the feed plate is pushed forward, and the motor direction is reversed. You only need to correct the direction of the motor. If the cutter and the feed plate are not coordinated, open the shield plate in the opposite direction of the control panel and slightly adjust the lifting adjustment disk.
When working, do not put your hands close to avoid cutting injuries, and do not be close to flammable items around to avoid dangerous accidents.

butcher cutting machine
Our Advantages

 

150

+

Number Of Employees

3000㎡+

Factory Area

10

+

Years Of Experience

800㎡+

Company Area

 

Commercial meat cutter

 

 

After cleaning the pulley parts of the machine equipment, use edible oil or engine oil to lubricate to reduce wear and increase the service life of the equipment.
Regularly check whether the lubricating oil in the worm gear reducer is consumed. If the oil level is lower than the transparent oil level mirror, it needs to be refilled.
After the equipment has been working for a period of time, the valves connecting the oil drain boxes at both ends of the equipment need to be opened to drain the oil to prevent the oil in the oil box from overflowing.
After each shift of use, the machine should be cleaned in time. (Mainly clean the material delivery table).
During each shift of operation, check whether there is a lack of oil in the slideway and whether the cutter screw is loose.
When the knife is not in use, it should be polished with a polishing stick, then sharpened with a whetstone, washed with warm water and detergent, and laid flat for use the next day.

 

Qualification & Honor

 

Qualification & Honor

 

Customer visits

 

Customer visits

 

 

 

 

Hot Tags: mutton chopping machine, China mutton chopping machine manufacturers, factory, meat processing equipment for boiling with meat, Frozen Meat Cutting Machine, meat cutting machine for kneading events, meat cutting machine for sous vide events, meat inspection machine, meat cutting machine for communicating events

Send Inquiry

(0/10)

clearall