Fully Automatic Potato Food Puffing Machine

Model
40 50 60
production capacities
40-50kg/h 80-100kg/h 120-150kg/h
Power
5.5KW 7.5KW 15KW

Send Inquiry

Product Introduction

Product Introduction

Corn puffing machines are widely used in the food processing industry. However, during use, they sometimes encounter the problem of not discharging materials. This not only affects production efficiency, but may also cause damage to the equipment. Below, we will discuss several main reasons why corn puffing machines do not discharge materials and the corresponding solutions.
Excessive humidity of raw materials: When the humidity of corn is too high, it is easy to form a blockage inside the puffing machine, resulting in no material discharge. At this time, the humidity of the raw materials should be adjusted to ensure that it is within the appropriate range.

Product Parameters

NO	Model	Capacity (kg/h)	power (kw)
1	DF50-28D	60-100	37
2	DF62-28D	200-350	90
3	DF72-28D	350-500	110
4	DF90-28D	500-1000	160
5	DF120-20D	1500-3500	250
6	DF65-20D	250-450	37
7	DF78-28D	300-600	90

Too many impurities in the raw materials: If the corn contains a lot of impurities, such as stones, metals, etc., they will get stuck inside the extruder and affect the normal feeding. Therefore, the raw materials should be screened and cleaned before use.
Screw wear: The screw is the core component of the extruder. It may wear after long-term use, resulting in poor feeding. At this time, the wear of the screw should be checked and replaced in time.
Motor failure: The motor drives the screw to rotate. If the motor fails, it will cause the screw speed to be insufficient, which will affect the feeding. The working status of the motor should be checked regularly to ensure its normal operation.

Feeding speed is too fast: If the feeding speed is too fast, the extruder may not be able to process too much raw material in time, causing blockage. The feeding speed should be adjusted to ensure that it matches the processing capacity of the extruder.
Improper temperature setting: The temperature inside the extruder is crucial to the extrusion effect. If the temperature is set too low or too high, it will affect the extrusion effect and feeding of the raw materials. The temperature setting should be adjusted according to the actual situation.