Rice Cracker Extruder

Model
40 50 60
Power
5.5KW 7.5KW 15KW
weights
310KG 330KG 360KG

Send Inquiry

Product Introduction

Product Introduction

There are also many things to pay attention to when operating a food extruder. Before starting the machine, check whether the fasteners of each part are tightened, and pay attention to the fact that the head bolts must be flattened and tightened. Before processing, start idling for 1-2 minutes to preheat, and check whether the operation is normal. After preheating, you can slowly add a small amount of wet rice (just to wet the rice). When the puffed fruit comes out normally, immediately add a small amount of dry rice continuously. Due to the low temperature at the beginning and the load effect, you must add the throttle at the beginning of processing, and add rice slowly. After the puffed fruit comes out 60-70 cm, gradually increase the amount of rice input, and the amount of rice input should be based on the power to drag. If the puffed fruit comes out with one side and no side, it means that the core is not placed properly or there are small stones in the rice blocking the outlet. You should increase the amount of rice input appropriately or use a hammer to knock on the core at the outlet from the direction of no to the direction of some.

Product Parameters

Model	production capacities	Power	weights	sizes
40	40-50kg/h	5.5KW	310KG	130012001100
50	80-100kg/h	7.5KW	330KG	135011001200
60	120-150kg/h	15KW	360KG	13501101200

1. Before using the extruder, you must carefully read the instruction manual and be familiar with the use and operation procedures of the equipment.
2. During use, you must operate according to the specified operating procedures. Do not adjust or modify at will to avoid causing harm to the equipment or the user.
3. Pay attention to safety during operation to avoid accidents such as electric shock, burns or mechanical injuries, and strictly abide by the safety operating procedures.
4. After use, the equipment should be cleaned in time, kept clean and hygienic, and regular maintenance should be carried out to extend the service life of the equipment.

As a mechanical equipment, the extruder needs regular maintenance to ensure the normal operation of the equipment and the stability of product quality. This includes cleaning the equipment, replacing wearing parts, checking electrical circuits, etc. Timely detection and handling of problems can reduce the failure rate and use costs, and improve the stability and production efficiency of the equipment.
In short, the operation of the extruder is relatively difficult and requires certain professional knowledge and skills, but as long as it is carried out in accordance with the instructions and safety operating procedures, it can be used normally. During use, attention should be paid to safe operation and regular maintenance should be carried out to extend the service life of the equipment and improve production efficiency.