Pork Bone Cutting Machine
Voltage
220v/380v
Power
3kw
Cutting thickness
5-50mm
Machine size
1300*650*950mm 1300*650*1200mm
- Product Introduction
Small bone cutter machine

Before installing the meat chopper, the user needs to prepare some tools and materials, including: a meat chopper, a plug, a screwdriver, a wire, a pipe, etc.
Installation steps
1. Determine the installation location: First, you need to determine the installation location of the meat chopper, which should be in a dry, ventilated, and close to a water source.
2. Install the plug: Insert the plug into the power socket of the meat chopper, and insert the other end of the plug into the power socket.
3. Connect the wire: Connect the wire to the wire pole of the meat chopper. Note that the connection order should be consistent with the order marked on the meat chopper.
4. Fix the meat mincer: Use a screwdriver to fix the meat mincer, and connect the bottom of the meat mincer to the workbench or wall tightly to keep it stable.
5. Connect the pipe: Connect the outlet of the meat mincer to the pipe. Note that the pipe should lead to the outside to avoid blockage or overflow.
6. Test run: Plug the meat mincer socket into the power socket, turn on the power of the meat mincer, and perform a test run to ensure that the meat mincer can work normally.

| Voltage | 220v/380v | 220v/380v |
| Power | 3kw | 3kw |
| Cutting thickness | 5-50mm | 5-50mm |
| Machine size | 1300*650*950mm | 1300*650*1200mm |
| Machine weight | 250kg | 300kg |
| Machine capacity | 500-800kg/h | 500-800kg |
Small chicken cutting machine
① When installing the components, disconnect the power supply of the equipment.
② Pre-install the handle first, do not tighten it.
③ Install the knife group and adjust the position of the knife group (align the positioning hole of the knife group with the inner box guide rod).
④ Finally tighten the handle.
⑤ Before using this machine, please clean it with warm water first, and do not wet the motor.

⑥When using the meat slicer, start the motor first to see if the blade is rotating correctly. If it is reversed, correct it immediately.
⑦After using the equipment, turn off the power first
⑧Remove the knife group and wash it with hot water
⑨Then install it, turn on the empty machine to shake off the water, and then apply cooking oil.
⑩When you need to cut meat slices, first remove the upper knife group, and then cut meat according to normal operation.

Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Small meat bone cutting machine
Precautions
1. Before installing the meat chopper, you need to read the instructions carefully to understand the usage and precautions of the meat chopper.
2. When installing the meat chopper, you should pay attention to safety, turn off the power supply, and avoid electric shock accidents.
3. During the use of the meat chopper, it should be used according to the normal usage method. Do not overuse or use it too frequently to avoid damage to the machine.
4. After using the meat chopper, it should be cleaned in time to ensure hygiene and safety for the next use.
Qualification & Honor

Customer visits

Hot Tags: pork bone cutting machine, China pork bone cutting machine manufacturers, factory, meat cutting machine for smoking events, Frozen Meat Cutting Machine, meat slicing machine, innovative meat cutting design, meat cutting machine for validating events, meat processing equipment for rolling with meat












