video

Home Nut Butter Machine

Name
Colloid mill
Stainless steel
SS304 or SS316L
Hopper size
7Liter, 10Liter,20Liter,30Liter customized

  • Product Introduction
Product Introduction

First of all, the colloid mill has a fixed chassis, which is usually fixed on a wooden board or fixed on flat ground with screws; when operating the colloid mill, it is necessary to check whether the screws and parts are tightened, whether the rotor is in contact with the stator, and whether there is any jamming. The stator-rotor gap of the colloid mill can be adjusted by turning the handle; after connecting to the power supply, it is necessary to pay attention to whether the rotation direction of the rotor is consistent with the arrow on the base (counterclockwise rotation); after turning on the motor, first check whether the colloid mill has any noise, vibration, etc.; the colloid mill can be ground once or multiple times when processing materials; after using the colloid mill, the rotor and stator need to be cleaned.

Product Parameters

 

model capacity power No-load speed size
130 0.2-4t/h 7.5kw 2900r/min 900*400*1000mm
180 0.8-6.0t/h 15kw 2900r/min 1100*500*1100mm
210 4-15t/h 22kw 2600r/min 1200*500*1400mm

 

 
 
electric peanut butter machine

Inspection before using the colloid mill
1. Check whether the feed and discharge ports, as well as the material pipes, are connected properly. This step is mainly to ensure that the material will not leak and cause mechanical wear or other problems.
2. Check whether the screws of the machine body and the fastening screws are tightened, and then operate the adjustment device used to control the gap between the rotor and the stator counterclockwise to increase the gap between the rotor and the stator, and then use a professional wrench to check whether the rotor is stuck. If so, it needs to be handled.
3. Connect the cooling pipe and the drain pipe to determine whether the connection is tight.
4. When the colloid mill is not in use, it is necessary to check the adjustment device and the gap between the rotor and the stator to ensure that there is no space left in the gap and try to keep the gap of the grinding disc fixed.

Tips for using colloid mill:
1. After turning on the power, check whether the motor operation and rotor running direction are consistent with the arrow direction shown on the colloid mill equipment, that is, clockwise. Reverse rotation is prohibited, because reverse rotation will cause the rotor fixing bolts to loosen or fall off, and long-term reverse rotation will also damage the colloid mill.
2. Check the operation of the colloid mill motor, whether the motor, rotor and other components make noise or strong vibration. If such a phenomenon exists, you need to use a special wrench to check.
3. Operate according to the markings on the cooling device, connect the water inlet and outlet, and connect the cooling water to the machine body. Generally, the cooling water pressure is about 0.15Mpa and the water temperature is ≤25℃. The cooling water can be recycled after filtration.
4. Turn on the power, start the motor, adjust the gap between the rotor and the stator, loosen the fastening device, that is, turn the fastener counterclockwise at the same time, it will drive the adjusting ring to adjust, so that we can adjust the gap between the rotor and the stator. Counterclockwise rotation will make the gap larger and make the material particles coarser, and clockwise rotation will make the gap smaller and make the material particles finer.

domestic peanut butter making machine

 

 

Our Advantages

 

150

+

Number Of Employees

3000㎡+

Factory Area

10

+

Years Of Experience

800㎡+

Company Area

 

Qualifications and Honors

 

Qualifications And Honors

Hot Tags: home nut butter machine, China home nut butter machine manufacturers, factory, peanut butter innovation system, peanut butter training system, industrial peanut butter machine, Ketchup Making Machine, peanut butter processing process, peanut butter lids

Send Inquiry

(0/10)

clearall