High Quality Automatic Snack Extruder

Model
40 50 60
production capacities
40-50kg/h 80-100kg/h 120-150kg/h
Power
5.5KW 7.5KW 15KW

Send Inquiry

Product Introduction

Product Introduction

Adjusting the temperature is the first step in the extruder discharge. Usually, the temperature needs to be adjusted to a suitable range to ensure that the material can be fully heated and expanded. Generally speaking, the temperature range of the extruder is 180℃~220℃, so we need to adjust the temperature according to different materials.
In addition to adjusting the temperature, adjusting the speed is also a very critical step. Before adjusting the speed, we need to understand the properties of the raw materials first and adjust the speed reasonably according to different materials.

Product Parameters

NO	Model	Capacity (kg/h)	power (kw)
1	DF50-28D	60-100	37
2	DF62-28D	200-350	90
3	DF72-28D	350-500	110
4	DF90-28D	500-1000	160
5	DF120-20D	1500-3500	250
6	DF65-20D	250-450	37
7	DF78-28D	300-600	90

Adjusting humidity involves controlling moisture. Generally speaking, during the extruder discharge process, the moisture in the material needs to be properly controlled to ensure that the material can be fully expanded.
When operating the extruder, special attention should be paid to safety. Before discharging, we need to ensure that the operator wears protective gloves and masks. This can effectively reduce the possibility of injury to the operator due to not wearing protective equipment.

After discharging, we need to clean the extruder. This ensures the next operation goes smoothly.
Extruder discharging is a process that requires skill, and we need to adjust key factors such as temperature, speed and humidity according to the characteristics of different materials. During the operation, we also need to pay attention to safety and clean the extruder in time after discharging to ensure the next operation goes smoothly.