video

Intelligent Food Extruder

Model
80
production capacities
200-240kg/h
Power
22kW
weights
460KG
sizes
1500*1450*1250

  • Product Introduction
Product Introduction

There are two types of puffing, one is wet puffing and the other is dry puffing. The so-called wet method is to add water or water vapor to the material, and the so-called dry method is to add no water or steam. Popcorn machine belongs to dry puffing.
A spiral shaft is installed in the barrel of the puffing machine, and the spiral blades on the spiral shaft are intermittent and discontinuous. The shear pins penetrate into the inner wall of the cylinder and protrude into the gaps between the spiral blades. When working, the combined action of the rotating spiral blades and the shear pins makes the materials in the cylinder fully mixed and stirred. The pitch of the spiral in the barrel gradually decreases from the feed port to the discharge port, so that the volume of the material in the barrel gradually decreases, and the material is continuously squeezed and kneaded under the push of the variable pitch spiral to make the material better bonded together.

Product Parameters

 

Model production capacities Power weights sizes
40 40-50kg/h 5.5KW 310KG 1300*1200*1100
50 80-100kg/h 7.5KW 330KG 1350*1100*1200
60 120-150kg/h 15KW 360KG 1350*110*1200

 

 
 
corn puff snack extruder machine

 

 

 

 

 

 

The soybean embryo is fed into the extruder evenly and compulsively by the screw conveyor. The embryo is pushed forward by the screw shaft in the machine chamber and is strongly extruded, which increases the density of the material. At the same time, due to the friction and heating between the material, the screw shaft and the inner wall of the machine chamber, the cutting and mixing effect formed by the fixed pin and the spiral blade, and the direct steam injection, the material is fully mixed, heated, pressurized, glued, and gelatinized, resulting in changes in the tissue structure.

 

 

 

When the material is transported by the spiral shaft in the machine barrel to the discharge end of the cone die head, the temperature of the material will rise to 105-115℃ and the moisture content will rise to 11%-13% under the condition of extrusion, friction and steam injection. At this time, the pressure of the material inside the machine barrel is 13-40 times greater than the normal atmospheric pressure. When the material is squeezed out of the slot of the cone die head, the pressure instantly changes from high pressure to normal pressure. The sudden drop in pressure causes the moisture to evaporate rapidly from the material structure. The water vapor penetrates the material during the volatilization process to form many pores inside the material. The material is thus subjected to a strong expansion effect, forming expanded particles with countless tiny channels and surface cracks.

corn extruder machine

 

 

Our Advantages

 

150

+

Number Of Employees

3000㎡+

Factory Area

10

+

Years Of Experience

800㎡+

Company Area

 

Qualifications and Honors

 

Qualifications And Honors

 

 

 

Hot Tags: intelligent food extruder, China intelligent food extruder manufacturers, factory, food extruder for frozen confectionery production, extruded food products, food extruder for international food production, food extruder for food experimenter, food extruder for frozen bakery products production, food extruder for food worker

Send Inquiry

(0/10)

clearall