Electric Stainless Steel Meat Slicer
model
200 400 800
Voltage
220v/380v
Power
2.5kw 3.0kw 3.5kw
Slice thickness
0.3-5mm
Width (custom-made)
270mm 510mm 900mm
- Product Introduction
Product Introduction
The beef and mutton slicer is equipped with a single-phase motor, high-grade bearings, and four blades installed on the knife disc. It has a slow speed ratio and high slicing efficiency. The thickness of the slices can be adjusted. It is widely used in food processing plants, etc. This machine has the characteristics of small size, high efficiency, easy operation, exquisite appearance, power saving and safety.
Correct use can make the beef and mutton slicer have a longer service life, so what is the correct usage mode? Let's take a brief look.
Product Parameters
| Model | 200 | 400 | 800 |
| Capacity | 50-200kg/H | 150-300kg/H | 50-600kg/H |
| Slice speed | 50-60/m | 50-60/m | 50-60/m |
| Slice thickness | 0.3-5mm | 0.3-5mm | 0.3-5mm |
| Width (custom-made) | 270mm | 510mm | 900mm |
Adjustment: First loosen the copper column nut, then turn the nut and the copper column to adjust the thickness. After the thickness is adjusted, the nut and the copper column must be tightened. If the cutter disc is parallel to the blade, do not turn on the machine. The cutter disc must be lower than the blade before the machine can be turned on for cutting. The maximum thickness is about 3mm, and the thinnest is stepless.
Precautions for using beef and mutton slicers:
1. Always oil the knife basin to avoid dirt. If there are food tails and small pieces left, it means that the softening is not proper or the blade is not sharp. It must be replaced or sharpened. If it is adjusted too thin, it is not easy to cut.
2. When slicing sticky food, cut with water on the surface.
After reading the above introduction, we know that the correct use of beef and mutton slicers is the key to whether the equipment can be used for a long time. Read the above content carefully to truly master the correct operation, ensure the service life of the equipment, and improve our production efficiency!
Our Advantages
150
+
Number Of Employees
3000㎡+
Factory Area
10
+
Years Of Experience
800㎡+
Company Area
Qualifications and Honors
Hot Tags: electric stainless steel meat slicer, China electric stainless steel meat slicer manufacturers, factory, Pork Slicer Machine, machine for cutting meat roll, Fish Fillet Processing Machine, Pork Cutter Machine, Electric Slicer For Meat, Electric Meat Cutter Machine
You Might Also Like
