video

Meat Slicing Machine

The meat slicer slices evenly and has a high degree of automation.

  • Product Introduction

Common problems with automatic slicer blades:
Meat slicers are commonly used in home and commercial kitchens, and blades are their core components. Common problems with meat slicer blades include the following:
1. The blade is too blunt or has severe scratches;
2. The blade wears unevenly;
3. The blade is deformed or broken;
4. The blade is rusted or food impurities accumulate.

 

Raw meat slicer

meat slicer for bacon

Model 200 400 800
Voltage 220v/380v 220v/380v 220v/380v
Power 2.5kw 3.0kw 3.5kw
Rolls 2 4 8
Capacity 50-200kg/H 150-300kg/H 50-600kg/H
Slice speed 50-60/m 50-60/m 50-60/m
Slice thickness 0.3-5mm 0.3-5mm 0.3-5mm
Width (custom-made) 270mm 510mm 900mm
Height(custom-made) 200mm 200mm 200mm
Length(custom-made) 600mm 600mm 600mm

 

Commercial jerky slicer sharpening steps:
For efficient and long-term use of jerky slicers, regular sharpening is required to keep the blade sharp, thereby improving efficiency and promoting the development of the catering industry. What are the steps for sharpening the machine?
1. Place the sharpener on a rough surface on the laboratory bench so that it will not move during sharpening.
2. Drop a small amount of thin lubricating oil or liquid paraffin in the center of the grindstone surface and spread it evenly to increase the friction density.
3. Install the handle and knife clip of the jerky slicer on the slicer with the blade facing forward and placed flat on the grindstone surface, with the heel of the knife roughly in the center of the grindstone.
4. When sharpening, the fingers should be kept in the correct position so that the force is even and easy to slide. Hold the knife handle with the right hand and the knife shell with the left hand, with the blade facing the front of the sharpener. Push the slicing knife of the mutton slicer from the lower right corner of the grindstone to the upper left corner of the grindstone and turn the blade from the top; the knife clip cannot leave the stone when turning it over, and the blade is facing the sharpener. Move the knife horizontally so that the blade of the heel is in the center of the front end of the grindstone, and then pull it back obliquely. At this time, turn the blade from the top and move the knife horizontally so that the slicing knife is in the original position on the grinding surface. In this way, there are eight movements each time, and the slicing knife should be in full contact with the grindstone, and repeat it repeatedly. When sharpening, press the entire blade evenly with both hands to avoid tilting, and prevent greasy fingers from sliding off the blade.

 

Restaurant slicer

raw meat slicer

 

Auto meat slicer maintenance and usage precautions

1. Before use, check whether the blade is normal, whether there is wear, deformation or other problems.

2. The blade should be cleaned in time during use to avoid accumulation of food impurities and bacteria.
3. Choose the appropriate slice thickness and slice angle according to actual needs.
4. Pay attention to safety when grinding the blade, wear gloves and goggles.
5. Apply a layer of edible oil or professional maintenance oil during maintenance.
Meat slicer blade grinding is one of the most important parts of meat slicer maintenance, which can extend the service life of the meat slicer, improve work efficiency and food quality. Through the introduction of this article, I believe you have mastered the skills and precautions of meat slicer blade grinding. If you have other questions or need more detailed guidance, please consult a professional.

 

Customer visits

Customer visits

Hot Tags: meat slicing machine, China meat slicing machine manufacturers, factory, system for slicing meat roll, device for catering meat roll slicing, machine for slicing commercial meat rolls, grocery store meat roll slicer, reliable meat roll slicer, cutter for meat rolls

← Previous: Automatic Slicer
Send Inquiry

(0/10)

clearall