video

Automatic Slicer

The meat slicer is of good quality and has a low failure rate.

  • Product Introduction

Cleaning the blade
1. Remove the blade from the machine first, clean it with water, and wipe it with a dry cloth.
2. Apply an appropriate amount of cooking oil to the cleaned blade to protect the blade surface, and then put the blade back into the machine.
Maintaining the blade
1. After each use, the blade should be cleaned in time to ensure the hygiene of the blade and reduce the chance of bacterial growth.
2. During use, be careful not to let the blade slide on the surface of hard objects to avoid wearing the blade surface.
3. If it is not used for a long time, the blade should be removed, coated with an appropriate amount of cooking oil, and stored in a dry and ventilated place.
The above is the correct way to use the blade of the meat slicer. As long as you follow the operating procedures, operate, clean and maintain it properly, you can extend the service life of the blade and bring users a better meat cutting experience.

 

Auto meat slicer

home cold cut slicer

Model MS-10 MS-20 MS-40 MS-60 MS-80
Slicer rows 1 roll 2 roll 4 roll 6 roll 8 roll
Frequency 60 times/min 60 times/min 60 times/min 60 times/min 60 times/min
Power 0.55kw 1.5kw 2.2kw 3kw 4kw
Capacity 20-30kg/h 75-100kg/h 150-200kg/h 220-300kg/h 300-400kg/h
Height of slice 10-150mm 10-160mm 10-160mm 10-160mm 10-160mm
Thickness of slice 0.2-10mm 0.2-10mm 0.2-10mm 0.2-10mm 0.2-10mm
Processing length 600mm 600mm 600mm 600mm 600mm
Szie (mm) 950*350*400 1450*600*1300 1450*880*1300 1500*1100*1400 1500*1300*1400
Weight(kg) 80kg 240kg 330kg 410kg 500kg

 

Tips for replacing the blade of the meat slicer
1. Pay attention to safety
Before replacing the blade, you need to turn off the power of the meat slicer and cut off the power supply to ensure safety. At the same time, you need to be careful not to touch the sharp edge of the blade to avoid hurting yourself.
2. Confirm the wearing parts
Before replacing the blade, you need to confirm whether the wearing parts are damaged. Wearing parts usually refer to push rods and scrapers with rubber pads. These wearing parts are easier to replace and can be directly removed and replaced.
3. Remove the old blade
You need to use a wrench to unscrew the fixing screws of the old blade, and then remove the old blade. Every time you replace the blade, it is recommended to thoroughly clean the inside of the meat slicer to prevent the residue on the old blade from being deeply embedded in the meat slicer.
4. Replace the new blade
When installing the new blade on the meat slicer, you need to check the direction carefully to ensure that the new blade is installed in the correct direction, and then re-fix the screws, tighten and secure.

 

Meat meat slicer

small electric food slicer

 

How to install the blade on the electric slicer machine?
1. First, place the meat slicer on a stable workbench to ensure that it will not shake or slide.
2. Remove the meat cutting disc of the machine, open the locking ring of the meat cutting disc, and take out the blade shaft.
3. Apply an appropriate amount of cooking oil on the blade, and then insert the blade shaft into the slot inside the machine to ensure that the blade shaft is fully embedded in the slot.
4. Tighten the locking ring and put the meat cutting disc back on the machine.
Use the blade
1. Before use, remove the blade from the machine and check whether the blade is in good condition. If it is damaged or missing, it should be replaced immediately.
2. Put the meat with skin or tendons into the machine and turn on the power of the machine.
3. Press the handle of the meat slicer by hand and push the meat cutting disc forward until the meat is completely cut.
4. After use, turn off the power and remove the blade for cleaning.

 

Our Team

Our Team

 

Qualification & Honor

Qualification & Honor

 

Hot Tags: automatic slicer, China automatic slicer manufacturers, factory, machine for food grade meat roll cutting in butcher shop, supermarket meat roll slicing equipment, machine for food grade meat roll cutting in butcher shop food retail, equipment for cutting meat roll in supermarket food production, cutter for industrial meat roll processing, reliable meat roll slicing machine

← Previous: Brisket Slicer
Send Inquiry

(0/10)

clearall